| Artículo | 2024 | 2D magnesium phosphate resorbable coating to enhance cell adhesion on titanium surfaces | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2024 | Development of bimetallic Ru/Ni/SBA-16 catalysts for catalytic hydrogenation of bio-based furfural to 2-methylfuran and furfuryl alcohol | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2024 | Efficient management of HVAC systems through coordinated operation of parallel chiller units: An economic predictive control approach | ENERGY AND BUILDINGS |
| Artículo | 2024 | Enhancing nonlinear solvers for the Navier–Stokes equations with continuous (noisy) data assimilation | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2024 | Medium- and long-term demand estimation integrating emerging technologies | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2024 | Reconstruction of thermomagnetic and phase transformation loops in magnetostructural transitions using selective integration of temperature first-order reversal curves (TFORC) distributions | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2024 | Reduced Basis modelling of turbulence with well-developed inertial range | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2024 | Structure-dependent oxidation behavior of Au-Cu nanoparticles | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2024 | Study of stability and thermo-magnetic response of MnCoFeGeSi mechanically alloyed systems | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2024 | Tunable magnetocaloric effect towards cryogenic range by varying Mn:Ni ratio in all-d-metal Ni(Co)-Mn-Ti Heusler alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 | ‘No one size fits all’: diverse impacts of temporary protected status on Haitians and Hondurans | Economics Letters |
| Artículo | 2023 | A fitting procedure for probability density functions of service restoration times. Application to underground cables in medium-voltage networks | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2023 | All-d-metal Ni(Co)-Mn(X)-Ti (X = Fe or Cr) Heusler alloys: Enhanced magnetocaloric effect for moderate magnetic fields | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 | Allocating the surplus induced by cooperation in distribution chains with multiple suppliers and retailers | Journal of Mathematical Economics |
| Artículo | 2023 | An innovative approach to assess the limitations of characterizing solar gains in buildings: a Spanish case study | ENERGY AND BUILDINGS |
| Artículo | 2023 | Analysing the indoor temperature ranges for an efficient control of HVAC systems | ENERGY AND BUILDINGS |
| Artículo | 2023 | Analysis and design of the central stack for the SMART tokamak | FUSION ENGINEERING AND DESIGN |
| Artículo | 2023 | Applications and multidisciplinary perspective on 3D printing techniques: Recent developments and future trends | Materials Science and Engineering: R: Reports |
| Artículo | 2023 | Biorefinery concept in the meat industry: From slaughterhouse biowastes to superaborbent materials | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2023 | Catalytic conversion of syngas to light hydrocarbons via simulated intermediates CO/CO2/DME/N2/H2 over the regulated acidity of SAPO-34 | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2023 | Cu(I) and Ag(I) complexes of two sterically demanding Xylyl-substituted phosphine ligands: synthesis, characterization, and structural examination | INORGANICA CHIMICA ACTA |
| Artículo | 2023 | Energy-conserving interface dynamics with asynchronous direct time integration employing arbitrary time steps | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2023 | Extending the concept of high-performance buildings to existing dwellings | ENERGY AND BUILDINGS |
| Artículo | 2023 | Extending the use of adaptive thermal comfort to air-conditioning: the case study of a local Japanese comfort model in present and future scenarios | ENERGY AND BUILDINGS |
| Artículo | 2023 | First measurements of a scintillator-based fast-ion loss detector in reversed Ip/Bt at the ASDEX Upgrade tokamak | FUSION ENGINEERING AND DESIGN |
| Artículo | 2023 | First-order phase transition in high-performance La(Fe,Mn,Si)13H despite negligible hysteresis | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 | Improving winter thermal comfort in Mediterranean buildings upgrading the envelope: an adaptive assessment based on a real survey | ENERGY AND BUILDINGS |
| Artículo | 2023 | Interatomic-potential-free, data-driven molecular dynamics | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2023 | Is the analysis scale crucial to assess energy poverty? analysis of yearly and monthly assessments using the 2 M indicator in the south of Spain | ENERGY AND BUILDINGS |
| Artículo | 2023 | Kinetics of H2S removal using alkaline residue as in-bed sorbent in fluidized bed gasification of biomass and wastes | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2023 | Low CO2 hydrogen streams production from formic acid through control of the reaction pH | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2023 | Microstructural characterization and thermal stability of He charged amorphous silicon films prepared by magnetron sputtering in helium | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2023 | On the influence of the nonlinear term in the numerical approximation of Incompressible Flows by means of proper orthogonal decomposition methods | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2023 | On the order of magnetic transition in MnCo1−xFexGe (x = 0.20, 0.06 and 0.03) mechanical alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 | Optimising LCA in complex buildings with MLCAQ: a BIM-based methodology for automated multi-criteria materials selection | ENERGY AND BUILDINGS |
| Artículo | 2023 | Photovoltaic energy balance estimation based on the building integration level | ENERGY AND BUILDINGS |
| Artículo | 2023 | Porous beta titanium alloy coated with a therapeutic biopolymeric composite to improve tribomechanical and biofunctional balance | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2023 | Predictive simulations for plasma scenarios in the SMART tokamak | FUSION ENGINEERING AND DESIGN |
| Artículo | 2023 | Providing a feasible energy retrofitting technique based on polyurethane foam injection to improve windows performance in the building stock | ENERGY AND BUILDINGS |
| Artículo | 2023 | Recent developments in amino acid-derived imidazole-, imidazolium- and N-heterocyclic carbene-carboxylate complexes | INORGANICA CHIMICA ACTA |
| Artículo | 2023 | Retrofit strategies to mitigate overheating linking urban climate modeling and urban building simulations with outdoor comfort. An urban sector in Malaga (Spain) | ENERGY AND BUILDINGS |
| Artículo | 2023 | Reversibility and thermal dependence of the martensitic transformation in a melt-spun Ni55Fe17Ga26Co2 Heusler alloy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 | Thermal modeling of existing buildings in high-fidelity simulators: a novel, practical methodology | ENERGY AND BUILDINGS |
| Artículo | 2023 | Three-field partitioned analysis of fluid–structure interaction problems with a consistent interface model | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2023 | Ti6Al4V coatings on titanium samples by sputtering techniques: microstructural and mechanical characterization | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 | Ultra-low hysteresis in giant magnetocaloric Mn1-xVxFe0.95(P,Si,B) compounds | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 | Use of ultracapacitor for provision of inertial response in virtual synchronous generator: design and experimental validation | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2022 | A combined phase-field and cohesive zone model approach for crack propagation in layered structures made of nonlinear rubber-like materials | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Revisión | 2022 | Activity and efficiency trends for the residential sector across countries | ENERGY AND BUILDINGS |
| Artículo | 2022 | Albero: An alternative natural material for solar energy storage by the calcium-looping process | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2022 | Comparative study between the passive house standard in warm climates and nearly zero energy buildings under Spanish technical building code in a dwelling design in Seville, Spain | ENERGY AND BUILDINGS |
| Artículo | 2022 | Comparative study of structural and magnetic properties of ribbon and bulk Ni55Fe19Ga26 Heusler alloy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2022 | Cubic to hexagonal tuning in Fe2Mn(Si1-xGex) Heusler alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2022 | Dehydroxylation processing and lasing properties of a Nd alumino-phosphate glass | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2022 | Effect of sintering under CO+N2/H2 and CO2+air atmospheres on the physicochemical features of a commercial nano-YSZ | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2022 | Enhanced low-temperature CO2 methanation performance of Ni/ZrO2 catalysts via a phase engineering strategy | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2022 | Error analysis of a residual-based stabilization-motivated POD-ROM for incompressible flows | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2022 | Evaluation of the power frequency magnetic field generated by three-core armored cables through 3D finite element simulations | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2022 | Experimental validation of ultra-shortened 3D finite element electromagnetic modeling of three-core armored cables at power frequency | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2022 | Exploring the local environment of the engineered nanoclay Mica-4 under hydrothermal conditions using Eu(3+)as a luminescent probe | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2022 | Improving supply quality in distribution power networks: a game-theoretic planning approach | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2022 | Influence of the wind variability on the calculation of dynamic line rating | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2022 | Microstructure, magnetism and critical behavior of hot pressed Ni-Mn-Ga/Al magnetocaloric composites with enhanced thermal conductivity and mechanical properties | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2022 | Mitigation of climate change in Mediterranean existing social dwellings through numerical optimization of building stock models | ENERGY AND BUILDINGS |
| Artículo | 2022 | Nonlinear thermo-elastic phase-field fracture of thin-walled structures relying on solid shell concepts | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2022 | Optimal retrofit solutions considering thermal comfort and intervention costs for the Mediterranean social housing stock | ENERGY AND BUILDINGS |
| Artículo | 2022 | Phase field modeling of brittle fracture in large-deformation solid shells with the efficient quasi-Newton solution and global–local approach | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2022 | Plasma assisted CO2 dissociation in pure and gas mixture streams with a ferroelectric packed-bed reactor in ambient conditions | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2022 | Reactive flash sintering of SrFe12O19 ceramic permanent magnets | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2022 | Surface Si decoration of ultrafine NaFeMn-Si catalyst enabling high Fe-phase electron density for effectively converting syngas to aromatics | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2022 | Synthesis and characterization of chiral bidentate bis(N-heterocyclic carbene)-carboxylate palladium and nickel complexes | INORGANICA CHIMICA ACTA |
| Artículo | 2022 | The Calcium Looping process for energy storage: Insights from in situ XRD analysis | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2022 | Thermal comfort prediction of the existing housing stock in southern Spain through calibrated and validated parameterized simulation models | ENERGY AND BUILDINGS |
| Artículo | 2022 | Titania coatings: a mechanical shield for cohesive granular media at high temperatures | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | A GIS-based methodology to increase energy flexibility in building cluster through deep renovation: A neighborhood in Seville | ENERGY AND BUILDINGS |
| Artículo | 2021 | Adaptive setpoint temperatures to reduce the risk of energy poverty? A local case study in Seville | ENERGY AND BUILDINGS |
| Artículo | 2021 | Analysis of frequency-dependent network equivalents in dynamic harmonic domain | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2021 | Analysis of supercritical carbon dioxide Brayton cycles for a helium-cooled pebble bed blanket DEMO-like fusion power plant | FUSION ENGINEERING AND DESIGN |
| Artículo | 2021 | Are the dwellings of historic Mediterranean cities cold in winter? A field assessment on their indoor environment and energy performance | ENERGY AND BUILDINGS |
| Artículo | 2021 | Arene-ruthenium(II) complexes with pyrazole-based ligands bearing a pyridine moiety: Synthesis, structure, DFT calculations, and cytotoxicity | INORGANICA CHIMICA ACTA |
| Artículo | 2021 | Bio-inspired Ni dinuclear complexes as heterogeneous catalysts for hydrogen evolution | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Calcination under low CO2 pressure enhances the calcium Looping performance of limestone for thermochemical energy storage | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Ceria-based catalytic coatings on biomorphic silicon carbide: A system for soot oxidation with enhanced properties | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Characterization of the response of fast ion loss detectors to fusion neutrons for applications at JT-60SA and ITER | FUSION ENGINEERING AND DESIGN |
| Artículo | 2021 | Characterization of thermal hysteresis in magnetocaloric NiMnIn Heusler alloys by Temperature First Order Reversal Curves (TFORC) | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2021 | Coils and power supplies design for the SMART tokamak | FUSION ENGINEERING AND DESIGN |
| Artículo | 2021 | Contribution of energy efficiency standards to life-cycle carbon footprint reduction in public buildings in Chile | ENERGY AND BUILDINGS |
| Artículo | 2021 | Data-driven variational multiscale reduced order models | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2021 | Deconvolution of overlapping first and second order phase transitions in a NiMnIn Heusler alloy using the scaling laws of the magnetocaloric effect | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2021 | Features of coupled AgBr/WO3 materials as potential photocatalysts | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2021 | Hardware developments and commissioning of the imaging heavy ion beam probe at ASDEX upgrade | FUSION ENGINEERING AND DESIGN |
| Artículo | 2021 | Impact of Tb4+ and morphology on the thermal evolution of Tb-doped TiO2 nanostructured hollow spheres and nanoparticles | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2021 | Influence of the type of thermostat on the energy saving obtained with adaptive setpoint temperatures: analysis in the current and future scenario | ENERGY AND BUILDINGS |
| Artículo | 2021 | Kinetics and cyclability of limestone (CaCO3) in presence of steam during calcination in the CaL scheme for thermochemical energy storage | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Low concentration CO2 capture in fluidized beds of Ca(OH)2 as affected by storage humidity | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Magnetic equilibrium design for the SMART Tokamak | FUSION ENGINEERING AND DESIGN |
| Artículo | 2021 | Mechanical and electromagnetic design of the vacuum vessel of the SMART Tokamak | FUSION ENGINEERING AND DESIGN |
| Artículo | 2021 | MnFeNiGeSi high-entropy alloy with large magnetocaloric effect | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2021 | Modelling of a fluidized bed carbonator reactor for post-combustion CO2 capture considering bed hydrodynamics and sorbent characteristics | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | N-substituted aminobiphenyl palladacycles stabilized by dialkylterphenyl phosphanes: preparation and applications in C[sbnd]N cross-coupling reactions | INORGANICA CHIMICA ACTA |
| Artículo | 2021 | Nanosilica to improve the flowability of fine limestone powders in thermochemical storage units | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | On the convergence order of the finite element error in the kinetic energy for high Reynolds number incompressible flows | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2021 | On the dynamic assessment of the Local-Maximum Entropy Material Point Method through an Explicit Predictor-Corrector Scheme | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2021 | Optimal chiller loading including transients | ENERGY AND BUILDINGS |
| Artículo | 2021 | Prediction and identification of physical systems by means of Physically-Guided Neural Networks with meaningful internal layers | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2021 | Solar gasification of biomass in a dual fluidized bed | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Structure-sensitivity of formic acid dehydrogenation reaction over additive-free Pd NPs supported on activated carbon | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Synthesis, characterization, DNA binding ability, in vitro cytotoxicity, electrochemical properties and theoretical studies of copper(II) carboxylate complexes | INORGANICA CHIMICA ACTA |
| Artículo | 2021 | The role of hybrid systems in the decarbonization of residential heritage buildings in Mediterranean climate. A case study in Seville, Spain | ENERGY AND BUILDINGS |
| Artículo | 2021 | Thermo-magnetic characterization of phase transitions in a Ni-Mn-In metamagnetic shape memory alloy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2021 | Thermo-mechanical assessment of the JT-60SA fast-ion loss detector | FUSION ENGINEERING AND DESIGN |
| Artículo | 2021 | Understanding the active sites of boron nitride for CWPO: An experimental and computational approach | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2021 | Unveiling mechanochemistry: kinematic-kinetic approach for the prediction of mechanically induced reactions | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2020 | A 3D interpenetrated Co(II)-glutarate coordination polymer: Synthesis, crystal structure, magnetic and adsorption properties | INORGANICA CHIMICA ACTA |
| Artículo | 2020 | A multiscale data-driven approach for bone tissue biomechanics | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2020 | A phase field approach enhanced with a cohesive zone model for modeling delamination induced by matrix cracking | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2020 | A systematic approach to service restoration in distribution networks | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2020 | Accelerating the convergence of AFETI partitioned analysis of heterogeneous structural dynamical systems | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2020 | Chemical and structural heterogeneities in Nd-doped oxynitride phosphate laser glasses | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2020 | Development of Ti(C,N)-based cermets with (Co,Fe,Ni)-based high entropy alloys as binder phase | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2020 | Effect of pressure on the phase stability and magnetostructural transitions in nickel-rich NiFeGa ribbons | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2020 | Evaluating assumptions of scales for subjective assessment of thermal environments – Do laypersons perceive them the way, we researchers believe? | ENERGY AND BUILDINGS |
| Artículo | 2020 | Experimental evaluation of different natural cold sinks integrated into a concrete façade | ENERGY AND BUILDINGS |
| Artículo | 2020 | Exploiting the π-bonding for the separation of benzene and cyclohexane in zeolites | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2020 | Failure rates in distribution networks: Estimation methodology and application | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2020 | Homochiral imidazolium-based dicarboxylate compounds: Structure and solution behaviour | INORGANICA CHIMICA ACTA |
| Revisión | 2020 | Inductive fault current limiters: a review | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2020 | Milling effects on the distribution of Curie temperatures and magnetic properties of Ni-doped La0·7Ca0·3MnO3 compounds | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2020 | Power injection model of IDC-PFC for NR-based and technical constrained MT-HVDC grids power flow studies | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2020 | Role of particle size on the cohesive behavior of limestone powders at high temperature | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2020 | Study of the kinetics and products of the devitrification process of mechanically amorphized Fe70Zr30 alloy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2020 | Towards an in-situ evaluation methodology of thermal resistance of basement walls in buildings | ENERGY AND BUILDINGS |
| Artículo | 2020 | Understanding the performance gap in energy retrofitting: Measured input data for adjusting building simulation models | ENERGY AND BUILDINGS |
| Artículo | 2020 | Unit cell volume reduction of Gd5(Si,Ge)4 nanoparticles controlled by bulk compressibility | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2020 | π-Complexation for olefin/paraffin separation using aluminosilicates | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | A comprehensive hydrodynamic analysis of a full-scale oxidation ditch using Population Balance Modelling in CFD simulation | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | A locked mode indicator for disruption prediction on JET and ASDEX upgrade | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | A multidimensional linear model for disruption prediction in JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | An unsupervised data completion method for physically-based data-driven models | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2019 | Analysis of the outer divertor hot spot activity in the protection video camera recordings at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Application of ADVANTG to the JET3-NEXP streaming benchmark experiment | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Comparison of quantitative IRT to estimate U-value using different approximations of ECHTC in multi-leaf walls | ENERGY AND BUILDINGS |
| Artículo | 2019 | Consolidation by MF-ERS of mechanically alloyed Al powder | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Defect induces effect on LaCoO3: From diamagnetism to ferrimagnetism due to vacancy in the bulk lattice | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Does grain size have an influence on intrinsic mechanical properties and conduction mechanism of near fully-dense boron carbide ceramics? | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Does shaping catalysts modify active phase sites? A comprehensive in situ FTIR spectroscopic study on the performance of a model Ru/Al2O3 catalyst for the CO methanation | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | Effect of temperature on flow properties of magnetofluidized beds at low consolidations | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | Effect of the thermal annealing and the nominal composition in the elemental distribution of InxAl1-xAsySb1-y for triple junction solar cells | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Energy impact of the air infiltration in residential buildings in the Mediterranean area of Spain and the Canary islands | ENERGY AND BUILDINGS |
| Artículo | 2019 | Experimental study on partial oxy-combustion technology in a bench-scale CO2 capture unit | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | Implementation and exploitation of JET enhancements at different fuel mixtures in preparation for DT operation and next step devices | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Improved neutron activation dosimetry for fusion | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Influence of climate on the creation of multilayer perceptrons to analyse the risk of fuel poverty | ENERGY AND BUILDINGS |
| Artículo | 2019 | Interrelations of structure, electric surface charge, and hydrophobicity of organo-mica and -montmorillonite, tailored with quaternary or primary amine cations. Preliminary study of pyrimethanil adsorption | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2019 | Magnetocaloric effect and scaling analysis in superspinglass cobalt based nanoparticles | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Material migration and fuel retention studies during the JET carbon divertor campaigns | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Microstructure, interfaces and properties of 3YTZP ceramic composites with 10 and 20 vol% different graphene-based nanostructures as fillers | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Modeling of fixed-bed columns for gas physical adsorption | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | Modification of the order of the magnetic phase transition in cobaltites without changing their crystal space group | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Multicycle CO2 capture activity and fluidizability of Al-based synthesized CaO sorbents | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | Numerical comparisons of finite element stabilized methods for a 2D vortex dynamics simulation at high Reynolds number | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2019 | Off-stoichiometry LaFe5Six cubic phase induced by the reduced size of the nanoparticles produced by pulsed laser deposition | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | On the effects of missing chords and systematic errors on a new tomographic method for JET bolometry | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Optimizing the evaluation of thermal transmittance with the thermometric method using multilayer perceptrons | ENERGY AND BUILDINGS |
| Artículo | 2019 | Overview of the JET operation reliability | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Parameter estimation of fully regulated synchronous generators using Unscented Kalman Filters | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2019 | Performance of factory made solar heating systems according to standard ISO 9459-5:2007 | ENERGY AND BUILDINGS |
| Artículo | 2019 | Plasma boundary reconstruction in JET by magnetic measurements | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Potential of energy flexible buildings: Evaluation of DSM strategies using building thermal mass | ENERGY AND BUILDINGS |
| Artículo | 2019 | Recent progress in the biomass-mediated synthesis of porous materials | INORGANICA CHIMICA ACTA |
| Artículo | 2019 | Relationship between labeled network games and other cooperative games arising from attributes situations | Economics Letters |
| Artículo | 2019 | Sintering kinetics, defect chemistry and room-temperature mechanical properties of titanium nitride prepared by spark plasma sintering | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2019 | Social housing airtightness in Southern Europe | ENERGY AND BUILDINGS |
| Artículo | 2019 | Spectrometric analysis of inner divertor materials of JET carbon and ITER-like walls | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | Supramolecular association in Cu(II) coordination complexes involving energetically significant NO center dot center dot center dot NO pi-hole interaction and cooperative pi-stacked ternary assembly: Experimental and theoretical studies | INORGANICA CHIMICA ACTA |
| Artículo | 2019 | Tensile strength and compressibility of fine CaCO3 powders. Effect of nanosilica addition. | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2019 | The dud detector: An empirically-based real-time algorithm to save neutron and T budgets during JET DT operation | FUSION ENGINEERING AND DESIGN |
| Artículo | 2019 | The influence of the envelope in the preventive conservation of books and paper records. Case study: Libraries and archives in La Plata, Argentina | ENERGY AND BUILDINGS |
| Artículo | 2019 | The performance of Mediterranean low-income housing in scenarios involving climate change | ENERGY AND BUILDINGS |
| Artículo | 2019 | Thermal comfort and indoor air quality in low-income housing in Spain: the influence of airtightness and occupant behaviour | ENERGY AND BUILDINGS |
| Revisión | 2019 | Towards a multiple-indicator approach to energy poverty in the European Union: A review | ENERGY AND BUILDINGS |
| Artículo | 2019 | Towards the quantification of energy demand and consumption through the adaptive comfort approach in mixed mode office buildings considering climate change | ENERGY AND BUILDINGS |
| Artículo | 2019 | Transferring the index of vulnerable homes: Application at the local-scale in England to assess fuel poverty vulnerability | ENERGY AND BUILDINGS |
| Artículo | 2018 | 3D mixed micromechanics-FEM modeling of piezoresistive carbon nanotube smart concrete | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2018 | A new reliability-based data-driven approach for noisy experimental data with physical constraints | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2018 | Activation material selection for multiple foil activation detectors in JET TT campaign | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Assessment of thermal comfort and energy savings in a field study on adaptive comfort with application for mixed mode offices | ENERGY AND BUILDINGS |
| Artículo | 2018 | Calcium-Looping performance of mechanically modified Al2O3-CaO composites for energy storage and CO2 capture | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2018 | Characterisation of neutron generators and monitoring detectors for the in-vessel calibration of JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Control and data acquisition software upgrade for JET gamma-ray diagnostics | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Correction of the shape effect on magnetic entropy change in ball milled Fe70Zr30 alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 | Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Development of a new adaptive comfort model for low income housing in the central-south of Chile | ENERGY AND BUILDINGS |
| Artículo | 2018 | Divertor currents optimization procedure for JET-ILW high flux expansion experiments | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Dust generation in tokamaks: Overview of beryllium and tungsten dust characterisation in JET with the ITER-like wall | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Effect of milling mechanism on the CO2 capture performance of limestone in the Calcium Looping process | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2018 | Effects of milling time, sintering temperature, Al content on the chemical nature, microhardness and microstructure of mechanochemically synthesized FeCoNiCrMn high entropy alloy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 | Efficient and scalable discretization of the Navier-Stokes equations with LPS modeling | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2018 | Energy consumption reduction proposals for thermal systems in residential buildings | ENERGY AND BUILDINGS |
| Artículo | 2018 | Evaluating the environmental adaptability of a nearly zero energy retrofitting strategy designed for Dutch housing stock to a Mediterranean climate | ENERGY AND BUILDINGS |
| Artículo | 2018 | Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 | Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field-cohesive zone model approach | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2018 | Generation of a plasma neutron source for Monte Carlo neutron transport calculations in the tokamak JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Influence of the growth temperature on the composition distribution at sub-nm scale of InAlAsSb for solar cells | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 | Influence of the Mn content on the TiNbxMn alloys with a novel fcc structure | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 | Mechanosynthesis of Sr1-xLaxTiO3 anodes for SOFCs: Structure and electrical conductivity | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 | Modelling of the neutron production in a mixed beam DT neutron generator | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | New 3D model based urban energy simulation for climate protection concepts | ENERGY AND BUILDINGS |
| Artículo | 2018 | O-2/CO2 and O-2/N-2 combustion of bituminous char particles in a bubbling fluidized bed under simulated combustor conditions | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2018 | On the control system preparation for ELM pacing with vertical kicks experiments at TCV | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | On the potential of ruled-based machine learning for disruption prediction on JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Optimizing the homogenization technique for graphene nanoplatelet/yttria tetragonal zirconia composites: influence on the microstructure and the electrical conductivity | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 | Oxidative degradation of a novel AMP/AEP blend designed for CO2 capture based on partial oxy-combustion technology | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2018 | Partial discharge detection using PLC receivers in MV cables: A theoretical framework | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2018 | Plasma-wall interaction on the divertor tiles of JET ITER-like wall from the viewpoint of micro/nanoscopic observations | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Preparation for commissioning of materials detritiation facility at Culham Science Centre | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Real-time implementation with FPGA-based DAQ system of a probabilistic disruption predictor from scratch | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Shutdown dose rate measurements after the 2016 Deuterium-Deuterium campaign at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Shutdown dose rate neutronics experiment during high performances DD operations at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Solar radiation entering through openings: Coupled assessment of luminous and thermal aspects | ENERGY AND BUILDINGS |
| Artículo | 2018 | Synthesis, structure and properties of nickel and copper complexes containing N, O-hydrazone Schiff base ligand | INORGANICA CHIMICA ACTA |
| Artículo | 2018 | Testing of tritium breeder blanket activation foil spectrometer during JET operations | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | The dizinc bond as a ligand: A computational study of elongated dizinc bonds | INORGANICA CHIMICA ACTA |
| Artículo | 2018 | Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak | FUSION ENGINEERING AND DESIGN |
| Corrección | 2018 | Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak (vol 133, pg 135, 2018) | FUSION ENGINEERING AND DESIGN |
| Artículo | 2018 | Where to improve in human-in-the-loop tele-operated maintenance? A phased task analysis based on video data of maintenance at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | A 3D electromagnetic model of the iron core in JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | A tool to support the construction of reliable disruption databases | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Activation measurements in support of the 14 MeV neutron calibration of JET neutron monitors | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Analysis of activation and damage of ITER material samples expected from DD/DT campaign at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Calculation of the profile-dependent neutron backscatter matrix for the JET neutron camera system | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | CeBr3-based detector for gamma-ray spectrometer upgrade at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Characterization of mechanosynthesized Bi1-xSmxFeO3 samples unencumbered by secondary phases or compositional inhomogeneity | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 | Commissioning and first results of the reinstated JET ICRF ILA | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Concurrently coupled solid shell-based adaptive multiscale method for fracture | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2017 | Controlled switching strategies for transformer inrush current reduction: a comparative study | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2017 | Critical review of bim-based LCA method to buildings | ENERGY AND BUILDINGS |
| Artículo | 2017 | Deep learning for plasma tomography using the bolometer system at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Development of MPPC-based detectors for high count rate DT campaigns at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Direct visualization of electrical transport-induced alloy formation and composition changes in filled multi-wall carbon nanotubes by in situ scanning transmission electron microscopy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 | Dynamic and thermal simulations of a fast-ion loss detector for ITER | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Ecological footprint of the use and maintenance phase of buildings: Maintenance tasks and final results | ENERGY AND BUILDINGS |
| Artículo | 2017 | Effect of the impact energy on the chemical homogeneity of a (Ti,Ta,Nb)(C,N) solid solution obtained via a mechanically induced self-sustaining reaction | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 | Grid-forming VSC control in four-wire systems with unbalanced nonlinear loads | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2017 | Hardware architecture of the data acquisition and processing system for the JET Neutron Camera Upgrade (NCU) project | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Improving the pollutant removal efficiency of packed-bed plasma reactors incorporating ferroelectric components | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2017 | ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET | FUSION ENGINEERING AND DESIGN |
| Revisión | 2017 | Life cycle assessment (LCA) of building refurbishment: A literature review | ENERGY AND BUILDINGS |
| Artículo | 2017 | Magnetic stabilization of fluidized beds: Effect of magnetic field orientation | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2017 | Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-like wall | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Microcalorimetry: A powerful tool for quantitative analysis of aging hardening response of Cu-Ni-Sn alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 | Multi-objective optimisation model: A housing block retrofit in Seville | ENERGY AND BUILDINGS |
| Artículo | 2017 | Normal and inverse magnetocaloric effects in structurally disordered Laves phase Y1-xGdxCo2 (0 <= x <= 1) compounds | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 | On the assessment of the energy performance and environmental behaviour of social housing stock for the adjustment between simulated and measured data: The case of mild winters in the Mediterranean climate of southern Europe | ENERGY AND BUILDINGS |
| Artículo | 2017 | Phase composition and growth mechanisms of half-metal Heusler alloy produced by Pulsed Laser Deposition: From core-shell nanoparticles to amorphous randomic clusters | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2017 | Real time control developments at JET in preparation for deuterium-tritium operation | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Response of the imaging cameras to hard radiation during JET operation | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Retrofit strategies towards Net Zero Energy Educational Buildings: A case study at the University of the Basque Country | ENERGY AND BUILDINGS |
| Artículo | 2017 | Revisiting the problem of a crack impinging on an interface: A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2017 | Rigid and adjustable fixation of the shielding modules into the ITER port plugs | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Simulation of neutral gas flow in the JET sub-divertor | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Stabilized mixed displacement-pressure finite element formulation for linear hydrodynamic problems with free surfaces | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2017 | Status of ITER material activation experiments at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Study of phases evolution in high-coercive MnAl powders obtained through short milling time of gas-atomized particles | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 | Syntheses, solid structures, and behavior in solution of [MI2(CO)(3)(pyrazole)(2)] complexes (M = Mo, W) | INORGANICA CHIMICA ACTA |
| Artículo | 2017 | Synthesis and characterization of in situ-reinforced Al-AlN composites produced by mechanical alloying | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 | Synthesis and structure of nickel and copper complexes containing the N-allyl-o-hydroxyacetophenoniminato ligand and the application of copper complex as catalyst for aerobic alcohol oxidations | INORGANICA CHIMICA ACTA |
| Artículo | 2017 | Technical preparations for the in-vessel 14 MeV neutron calibration at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Testing for the implicit weights of the dimensions of the Human Development Index using stochastic dominance | Economics Letters |
| Artículo | 2017 | The emissivity of W coatings deposited on carbon materials for fusion applications | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments | FUSION ENGINEERING AND DESIGN |
| Artículo | 2017 | Water-to-air-heat exchanger and indirect evaporative cooling in buildings with green roofs | ENERGY AND BUILDINGS |
| Artículo | 2016 | A new analytical approach for simplified thermal modelling of buildings: Self-Adjusting RC-network model | ENERGY AND BUILDINGS |
| Artículo | 2016 | A PGD-based multiscale formulation for non-linear solid mechanics under small deformations | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2016 | Advanced design of the Mechanical Tritium Pumping System for JET DTE2 | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | Air conditioning and passive environmental techniques in historic churches in Mediterranean climate. A proposed method to assess damage risk and thermal comfort pre-intervention, simulation-based | ENERGY AND BUILDINGS |
| Artículo | 2016 | An approach to modelling envelope airtightness in multi-family social housing in Mediterranean Europe based on the situation in Spain | ENERGY AND BUILDINGS |
| Artículo | 2016 | Anisotropy field distribution in soft magnetic Hitperm alloys submitted to different field annealing processes | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2016 | Applying the HVAC systems in an integrated optimization method for residential building's design. A case study in Spain | ENERGY AND BUILDINGS |
| Artículo | 2016 | Characterization of a diamond detector to be used as neutron yield monitor during the in-vessel calibration of JET neutron detectors in preparation of the DT experiment | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | Economic assessments of passive thermal rehabilitations of dwellings in Mediterranean climate | ENERGY AND BUILDINGS |
| Artículo | 2016 | Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2016 | Error bounds for POD expansions of parameterized transient temperatures | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2016 | Experimental evidences of enhanced magnetocaloric properties at room temperature and half-metallicity on Fe2MnSi-based Heusler alloys | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2016 | Forced deactivation and postmortem characterization of a metallic microchannel reactor employed for the preferential oxidation of CO (PROX) | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | Gd plus GdZn biphasic magnetic composites synthesized in a single preparation step: Increasing refrigerant capacity without decreasing magnetic entropy change | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2016 | Global optimization driven by genetic algorithms for disruption predictors based on APODIS architecture | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | Hot-pressing of (Ti,Mt)(C,N)-Co-Mo2C (Mt = Ta,Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | Influence of nanocrystallization on the magnetocaloric properties of Ni-based amorphous alloys: Determination of critical exponents in multiphase systems | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2016 | Influence of temperature and time on the Eu3+ reaction with synthetic Na-Mica-n (n=2 and 4) | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | Intensifying glycerol steam reforming on a monolith catalyst: A reaction kinetic model | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | JET experience on managing radioactive waste and implications for ITER | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | JET experiments with tritium and deuterium-tritium mixtures | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | JET Tokamak, preparation of a safety case for tritium operations | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | Magnesium hydride for energy storage applications: The kinetics of dehydrogenation under different working conditions | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2016 | Magnetocaloric functional properties of Sm0.6Sr0.4MnO3 manganite due to advanced nanostructured morphology | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2016 | Measurement of char surface temperature in a fluidized bed combustor using pyrometry with digital camera | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | Mechanically induced disorder and crystallization process in Ni-Mn-In ball-milled alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2016 | Modeling dispersion of partial discharges due to propagation velocity variation in power cables | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2016 | Multi-criteria assessment for the effective decision management in residential energy retrofitting | ENERGY AND BUILDINGS |
| Artículo | 2016 | Multivariable regression analysis to assess energy consumption and CO2 emissions in the early stages of offices design in Chile | ENERGY AND BUILDINGS |
| Artículo | 2016 | Nanocrystallization kinetics understood as multiple microprocesses following the classical theory of crystallization | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2016 | Neutronic analysis of JET external neutron monitor response | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | Neutronics experiments and analyses in preparation of DT operations at JET | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | Optimal gang-operated switching for transformer inrush current reduction | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2016 | Oxy-fuel combustion of a single fuel particle in a fluidized bed: Char combustion characteristics, an experimental study | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | Prediction of fixed-bed breakthrough curves for H2S adsorption from biogas: Importance of axial dispersion for design | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | Radiation damage and nuclear heating studies in selected functional materials during the JET DT campaign | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | Supercritical water reforming of model compounds of bio-oil aqueous phase: Acetic acid, acetol, butanol and glucose | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2016 | Technological exploitation of Deuterium-Tritium operations at JET in support of ITER design, operation and safety | FUSION ENGINEERING AND DESIGN |
| Artículo | 2016 | The calorimetric analysis as a tool for studying the aging hardening mechanism of a Cu-10wt%Ni-5.5wt%Sn alloy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2015 | A variational multi-scale method with spectral approximation of the sub-scales: Application to the 1D advection-diffusion equations | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2015 | Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2015 | Approximation of Smectic-A liquid crystals | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2015 | Design of active loops for magnetic field mitigation in MV/LV substation surroundings | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2015 | Effect of alpha-Fe impurities on the field dependence of magnetocaloric response in LaFe11.5Si1.5 | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2015 | Effect of particle size polydispersity on the yield stress of magnetofluidized beds as depending on the magnetic field orientation | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2015 | Electronic and atomic structure of complex defects in Al- and Ga-highly doped ZnO films | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2015 | Embodied energy of conventional load-bearing walls versus natural stabilized earth blocks | ENERGY AND BUILDINGS |
| Artículo | 2015 | Enhancement of magnetocaloric effect in B-rich FeZrBCu amorphous alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2015 | Enhancement of stability and photoactivity of TiO2 coatings on annular glass reactors to remove emerging pollutants from waters | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2015 | Hybrid real-complex current injection-based load flow formulation | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2015 | Hydration and carbonation reactions of calcium oxide by weathering: Kinetics and changes in the nanostructure | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2015 | Influence of hot compaction on microstructure and magnetic properties of mechanically alloyed Fe(Co)-based amorphous compositions | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2015 | Inrush current mitigation in three-phase transformers with isolated neutral | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2015 | Magnetocaloric effect of Fe-RE-B-Nb (RE = Tb, Ho or Tm) bulk metallic glasses with high glass-forming ability | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2015 | Magnetocaloric effect, magnetostructural and magnetic phase transformations in Ni50.3Mn36.5Sn13.2 Heusler alloy ribbons | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2015 | Microreactors technology for hydrogen purification: Effect of the catalytic layer thickness on CuOx/CeO2-coated microchannel reactors for the PROX reaction | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2015 | Numerical analysis of a finite element projection-based VMS turbulence model with wall laws | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2015 | Numerical simulation of the temperature evolution in a room with a mur neutralisant. Application to "The City of Refuge" by Le Corbusier | ENERGY AND BUILDINGS |
| Artículo | 2015 | PCM incorporation in a concrete core slab as a thermal storage and supply system: Proof of concept | ENERGY AND BUILDINGS |
| Artículo | 2015 | Probabilistic load flow with versatile non-Gaussian power injections | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2015 | Structural and chemical reactivity modifications of a cobalt perovskite induced by Sr-substitution. An in situ XAS study | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2015 | Study of thulium doping effect and enhancement of photocatalytic activity of rutile TiO<inf>2</inf> nanoparticles | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2015 | Synthesis and structure of mixed carboxylate-aminopyridinate and -amidinate complexes of dimolybdenum and ditungsten | INORGANICA CHIMICA ACTA |
| Artículo | 2015 | The enhanced pellet centrifuge launcher at ASDEX Upgrade: Advanced operation and application as technology test facility for ITER and DEMO | FUSION ENGINEERING AND DESIGN |
| Artículo | 2015 | Time domain analysis of partial discharges envelope in medium voltage XLPE cables | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2015 | Toughening of complete solid solution cermets by graphite addition | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2015 | Towards an analysis of the performance of monitor skylights under overcast sky conditions | ENERGY AND BUILDINGS |
| Artículo | 2015 | Uranium immobilization by FEBEX bentonite and steel barriers in hydrothermal conditions | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2014 | "Patio" and "Botijo": Energetic strategies' architectural integration in "Patio 2.12" prototype | ENERGY AND BUILDINGS |
| Artículo | 2014 | A prediction model based on neural networks for the energy consumption of a bioclimatic building | ENERGY AND BUILDINGS |
| Artículo | 2014 | Amorphization and evolution of magnetic properties during mechanical alloying of Co62Nb6Zr2B30: Dependence on starting boron microstructure | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2014 | An adaptive SUPG method for evolutionary convection-diffusion equations | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2014 | An integrated optimisation method for residential building design: A case study in Spain | ENERGY AND BUILDINGS |
| Artículo | 2014 | Chromium removal on chitosan-based sorbents - An EXAFS/XANES investigation of mechanism | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2014 | Crystallization kinetics and soft magnetic properties in metalloid-free (Fe, Co)(90)Zr-10 amorphous and nanocrystalline alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2014 | Design of the back-up system in Patio 2.12 photovoltaic installation | ENERGY AND BUILDINGS |
| Artículo | 2014 | Evolution of Fe environments in mechanically alloyed Fe-Nb-(B) compositions | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2014 | Extracting the composition of nanocrystals of mechanically alloyed systems using Mossbauer spectroscopy | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2014 | Magnetic field shielding optimization in underground power cable duct banks | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2014 | Modeling and simulation of the adsorption of biogas hydrogen sulfide on treated sewage-sludge | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2014 | New manganese (II) structures derived from 2,6-dichlorobenzoic acid: Syntheses, crystal structures and magnetism | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2014 | Spinodal decomposition and precipitation in Cu-Cr nanocomposite | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2014 | Structural relaxation in Fe(Co)SiAlGaPCB amorphous alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2013 | A model on the CaO multicyclic conversion in the Ca-looping process | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2013 | Daylighting design with lightscoop skylights: Towards an optimization of shape under overcast sky conditions | ENERGY AND BUILDINGS |
| Artículo | 2013 | Decomposition kinetics of model tar compounds over chars with different internal structure to model hot tar removal in biomass gasification | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2013 | Dry gas-solid carbonation in fluidized beds of Ca(OH)(2) and nanosilica/Ca(OH)(2) at ambient temperature and low CO2 pressure | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2013 | Experimental study of a ventilated facade with PCM during winter period | ENERGY AND BUILDINGS |
| Artículo | 2013 | Fast and reliable distribution load and state estimator | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2013 | Highly active Zr co-doped Ag-ZnO photocatalyst for the mineralization of Acid Black 1 under UV-A light illumination | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2013 | Joining and interface characterization of in situ reinforced silicon nitride | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2013 | Liquid-phase sintering of Ti(C,N)-based cermets. The effects of binder nature and content on the solubility and wettability of hard ceramic phases | JOURNAL OF ALLOYS AND COMPOUNDS |
| Ponencia | 2013 | Mitigation of edge localised modes with magnetic perturbations in ASDEX Upgrade | FUSION ENGINEERING AND DESIGN |
| Artículo | 2013 | Optimization of power and hydrogen production from glycerol by supercritical water reforming | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2013 | Role of starting phase of boron on the mechanical alloying of FeNbB composition | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2013 | Shishkin mesh simulation: A new stabilization technique for convection-diffusion problems | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2013 | Spark plasma sintering of TixTa1-xC0.5N0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2013 | Sustainable restoration of traditional building systems in the historical centre of Sevilla (Spain) | ENERGY AND BUILDINGS |
| Artículo | 2013 | Thermal analysis of a ventilated facade with PCM for cooling applications | ENERGY AND BUILDINGS |
| Artículo | 2013 | Tightening the energy consumptions of buildings depending on their typology and on Climate Severity Indexes | ENERGY AND BUILDINGS |
| Artículo | 2013 | Towards an analysis of the performance of lightwell skylights under overcast sky conditions | ENERGY AND BUILDINGS |
| Artículo | 2012 | A model of biomass char gasification describing the change in catalytic activity of ash | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2012 | Amorphous-nanocrystalline Al doped ZnO transparent conducting thin films | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2012 | Analysis of nanocrystallization kinetics and crystal size distribution under limited growth approach | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2012 | Analytical solutions of sharp interface models with nth order kinetics. Application to char conversion | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2012 | Anisotropic wear framework for 3D contact and rolling problems | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2012 | Comparison of equivalent ball milling processes on Fe70Zr30 and Fe70Nb30 | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2012 | Constructing HVAC energy efficiency indicators | ENERGY AND BUILDINGS |
| Artículo | 2012 | Daylighting design with lightscoop skylights: Towards an optimization of proportion and spacing under overcast sky conditions | ENERGY AND BUILDINGS |
| Artículo | 2012 | Development of multicomponent-multiphase materials based on (Ti,Ta,Nb)CxN1-x carbonitride solid solutions | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2012 | Extension of the classical theory of crystallization to non-isothermal regimes: Application to nanocrystallization processes | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2012 | High-temperature mechanical characteristics of NiO/3YTZP composites | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2012 | Invariant Hermitian finite elements for thin Kirchhoff rods. I: the linear plane case | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2012 | Invariant Hermitian finite elements for thin Kirchhoff rods. II: the linear three-dimensional case | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2012 | Microstructural characterization of hydrophobic Ti1-xAlxN coatings with moth-eye-like surface morphology | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2012 | Microstructure and high-temperature mechanical behavior of melt-growth Al2O3/Er3Al5O12/ZrO2 ternary eutectic composites | JOURNAL OF ALLOYS AND COMPOUNDS |
| Revisión | 2012 | Mixed-integer linear programming model for solving reconfiguration problems in large-scale distribution systems | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2012 | Multi-machine power system stability improvement using an observer-based nonlinear controller | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2012 | On tuning the magnetocaloric effect in Ni-Mn-In Heusler alloy ribbons with thermal treatment | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2012 | Unique real-variable expressions of the integral kernels in the Somigliana stress identity covering all transversely isotropic elastic materials for 3D BEM | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2011 | A heuristic technique to determine corrective control actions for reactive power flows | ELECTRIC POWER SYSTEMS RESEARCH |
| Revisión | 2011 | A review of HVAC systems requirements in building energy regulations | ENERGY AND BUILDINGS |
| Artículo | 2011 | A taxonomy of multi-area state estimation methods | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2011 | An adaptive finite element method for evolutionary convection dominated problems | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2011 | An iterative method for controlling reactive power flow in boundary transformers | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2011 | Artificial weathering pools of calcium-rich industrial waste for CO2 sequestration | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2011 | Design and testing of a microchannel reactor for the PROX reaction | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2011 | Different coordination modes of an aryl-substituted hydrotris(pyrazolyl)borate ligand in rhodium and iridium complexes | INORGANICA CHIMICA ACTA |
| Artículo | 2011 | Dynamic crack analysis in piezoelectric solids with non-linear electrical and mechanical boundary conditions by a time-domain BEM | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2011 | Fischer-Tropsch synthesis in microchannels | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2011 | Fracture analysis of plane piezoelectric/piezomagnetic multiphase composites under transient loading | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2011 | Growth of ZnO nanowires through thermal oxidation of metallic zinc films on CdTe substrates | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2011 | Heat transfer and mass flow correlations for ventilated facades | ENERGY AND BUILDINGS |
| Artículo | 2011 | Magnetic and structural characterization of Mo-Hitperm alloys with different Fe/Co ratio | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2011 | Magneto-caloric effect in the pseudo-binary intermetallic YPrFe17 compound | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2011 | Magnetocaloric effect in melt-spun FePd ribbon alloy with second order phase transition | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2011 | Multiscale simulation of particle-reinforced elastic plastic adhesives at small strains | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2011 | Selective CO removal over Au/CeFe and CeCu catalysts in microreactors studied through kinetic analysis and CFD simulations | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2011 | State-of-the-art, challenges, and future trends in security constrained optimal power flow | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2011 | Synthesis and structural characterization of two new copper(II) complexes with thiazoline derivative ligands: Influence of the coordination on the phagocytic activity of human neutrophils | INORGANICA CHIMICA ACTA |
| Artículo | 2011 | Two milling time regimes in the evolution of magnetic anisotropy of mechanically alloyed soft magnetic powders | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2010 | A 2.5D coupled FE-BE methodology for the dynamic interaction between longitudinally invariant structures and a layered halfspace | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2010 | A comparative study of the magnetocaloric effect in RNi2 (R = Dy, Ho, Er) intermetallic compounds | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2010 | A simple realistic modeling of full-scale wet limestone FGD units | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2010 | A simpler and exact mathematical model for the computation of the minimal power losses tree | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2010 | AISI 304 austenitic stainless steel monoliths: Modification of the oxidation layer and catalytic coatings after deposition and its catalytic implications | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2010 | Catalytic nanomedicine: Functionalisation of nanostructured cryptomelane | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2010 | Computational fluid dynamics study of heat transfer in a microchannel reactor for low-temperature Fischer-Tropsch synthesis | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2010 | Influence of Co addition on the magnetic properties and magnetocaloric effect of Nanoperm (Fe1-xCox)(75)Nb10B15 type alloys prepared by mechanical alloying | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2010 | Kinetic study of the methanogenic step of a two-stage anaerobic digestion process treating olive mill solid residue | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2010 | Microstructural characterization by TEM techniques of mechanically alloyed FeNbGe powders | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2010 | Nucleation rate and nanocrystallization of Co-60-(Fe, Mn)(18)-Nb-6-B-16 amorphous alloys in the frame of instantaneous growth approximation | JOURNAL OF ALLOYS AND COMPOUNDS |
| Revisión | 2010 | Partitioned formulation of internal and gravity waves interacting with flexible structures | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2010 | Preventive voltage control actions to securely face load evolution in power systems | ELECTRIC POWER SYSTEMS RESEARCH |
| Revisión | 2010 | Revision of the Trombe wall calculation method proposed by UNE-EN ISO 13790 | ENERGY AND BUILDINGS |
| Artículo | 2010 | Room temperature giant magnetoimpedance in La0.7Ba0.15Sr0.15MnO3 compound | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2010 | Stability analysis of five-phase induction motor drives with variable third harmonic injection | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2010 | Transient heat conduction in multi-layer walls: An efficient strategy for Laplace's method | ENERGY AND BUILDINGS |
| Artículo | 2010 | Tricritical point and critical exponents of La0.7Ca0.3-xSrxMnO3(x=0, 0.05, 0.1, 0.2, 0.25) single crystals | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2010 | Tunable Curie temperatures in Gd alloyed Fe-B-Cr magnetocaloric materials | JOURNAL OF ALLOYS AND COMPOUNDS |
| Revisión | 2009 | A review of benchmarking, rating and labelling concepts within the framework of building energy certification schemes | ENERGY AND BUILDINGS |
| Artículo | 2009 | AISI 304 Austenitic stainless steels monoliths for catalytic applications | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2009 | Aluminium anodisation for Au-CeO2/Al2O3-Al monoliths preparation | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2009 | Crystal structure of [NBu4](2)[Pd-2{C-4(COOMe)(4)}(2)(mu-OH)(2)] determined ab initio by charge flipping | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2009 | Evaluation of the phase composition of (NH4)(2)SO4 + (NH4)H2PO4 mixtures by X-ray diffractometry | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2009 | Hydrotrispyrazolylborate-copper complexes as catalysts for the styrene cyclopropanation reaction with ethyl diazoacetate under homogeneous and heterogeneous conditions | INORGANICA CHIMICA ACTA |
| Artículo | 2009 | Increasing the ductility and strength of submicrometer-grained P/M aluminium | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2009 | Influence of inoculum-substrate ratio on the anaerobic digestion of sunflower oil cake in batch mode: Process stability and kinetic evaluation | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2009 | Methane steam reforming in a microchannel reactor for GTL intensification: A computational fluid dynamics simulation study | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2009 | On two hypersingular time-domain BEM for dynamic crack analysis in 2D anisotropic elastic solids | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2009 | Plant optimisation and ash recycling in fluidised bed waste gasification | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2009 | Rhodium and iridium olefin complexes with bulky cyclopentadienyl and hydrotris(pyrazolyl)borate ligands | INORGANICA CHIMICA ACTA |
| Artículo | 2009 | Specific heat measurements on amorphous and nanocrystalline Al88Y5Ni5Co2 | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2009 | Supersaturated solid solution obtained by mechanical alloying of 75% Fe, 20% Ge and 5% Nb mixture at different milling intensities | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2009 | Synthesis of complex carbonitride powders TiyMT1-yCxN1-x (M-T: Zr, V, Ta, Hf) via a mechanically induced self-sustaining reaction | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2009 | Two-dimensional sediment transport models in shallow water equations. A second order finite volume approach on unstructured meshes | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2008 | 2-D transient dynamic analysis of cracked piezoelectric solids by a time-domain BEM | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2008 | A FETI method with a mesh independent condition number for the iteration matrix | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2008 | A formulation based on localized Lagrange multipliers for BEM-FEM coupling in contact problems | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2008 | A realistic approach to modeling an in-duct desulfurization process based on an experimental pilot plant study | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2008 | A review on buildings energy consumption information | ENERGY AND BUILDINGS |
| Artículo | 2008 | Adsorption of polluting substances on activated carbons prepared from rice husk and sugarcane bagasse | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2008 | Climatic zoning and its application to Spanish building energy performance regulations | ENERGY AND BUILDINGS |
| Artículo | 2008 | Fluidization of nanoparticles: A simple equation for estimating the size of agglomerates | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2008 | Gas-solid conversion in fluidised bed reactors | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2008 | Heat-resistant bulk nanostructured P/M aluminium | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2008 | Kinetic and microstructural studies on the devitrification of Fe60-xCo18MnxNb6B16 amorphous alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2008 | Micro-macro numerical modelling of bone regeneration in tissue engineering | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2008 | Numerical simulation of the gas-liquid flow in a laboratory scale bubble column Influence of bubble size distribution and non-drag forces | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2008 | Preparation of Au-CeO2 and Au-Al2O3/AISI 304 austenitic stainless steel monoliths and their performance in the catalytic oxidation of CO | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2008 | Well-balanced finite volume schemes for 2D non-homogeneous hyperbolic systems. Application to the dam break of Aznalcollar | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2007 | A direct extension of the Avrami equation to describe the non-isothermal crystallization of Al-base alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2007 | A posteriori error estimates for fully discrete nonlinear parabolic problems | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2007 | A technical assessment of a particle hybrid collector in a pilot plant | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2007 | Kinetic Monte Carlo modelling of neutron irradiation damage in iron | FUSION ENGINEERING AND DESIGN |
| Artículo | 2007 | Synthesis and solution behavior of the trinuclear palladium(II) unsaturated carboxylate complexes triangle-Pd-3[mu-O2CC(R ') = CHMe](6) (R ' = Me, H): X-ray structure of palladium(II) tiglate (R ' = Me) | INORGANICA CHIMICA ACTA |
| Artículo | 2007 | Synthesis of nanocrystalline MgH2 powder by gas-phase condensation and in situ hydridation: TEM, XPS and XRD study | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2007 | Thermal and microstructural dependence of the initial permeability of Co60Fe18Nb6(B,Cu)(16) alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2006 | A convenient synthesis of bis(phosphino)methanes: Formation of a nickel(II) bis(phosphino)methane monoxide complex | INORGANICA CHIMICA ACTA |
| Artículo | 2006 | Electrolyte effects on the intervalence transition within discrete binuclear cyano-bridged complexes. An estimation of activation free energy from static, optical and electrochemical data | INORGANICA CHIMICA ACTA |
| Artículo | 2006 | Hypersingular BEM for dynamic fracture in 2-D piezoelectric solids | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2006 | Mixed S/N and S/P/N ligands from carbohydrates: Synthesis and application in palladium-catalyzed allylic alkylation | INORGANICA CHIMICA ACTA |
| Artículo | 2006 | Mossbauer study of a Fe-Zr-B-Cu-(Ge, Co) nanocrystalline alloy series | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2006 | Trinuclear palladium complexes containing terminal nitrosyl ligands: Behavior in solid state and in solution. X-ray structures of Pd-3(NO)(2)(mu-OCOCX3)(4)(eta(2)-ArH)(2) (X = F, Cl; ArH = toluene or benzene) | INORGANICA CHIMICA ACTA |
| Artículo | 2005 | Characterization and stability studies of titanium beryllides | FUSION ENGINEERING AND DESIGN |
| Artículo | 2005 | Effect of partial substitution of Ge for B on the high temperature response of soft magnetic nanocrystalline alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2005 | Effect of the preparation method on the physicochemical properties of mixed magnesium-vanadium oxides | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2005 | Effects of the heating rate on the microstructure and the thermal stability of Fe-Co-Nb-B-(Cu) nanocrystalline alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2005 | Microstructural characterization of Eurofer-ODS RAFM steel in the normalized and tempered simulated condition and after thermal aging in fusion conditions | FUSION ENGINEERING AND DESIGN |
| Artículo | 2004 | "SOLVENT": development of a reversible solar-screen glazing system | ENERGY AND BUILDINGS |
| Artículo | 2004 | Dynamic BE analysis of 3-D cracks in transversely isotropic solids | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2004 | Influence of Mn and Cu addition on the hyperfine parameters of amorphous and nanocrystalline FeCoNbB alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2004 | Ligand exchange and abstraction reactions involving titanium isopropoxide with tris(pentafluorophenyl)borane and -alane: ramifications for ring-opening polymerization of propylene oxide | INORGANICA CHIMICA ACTA |
| Artículo | 2004 | Modelling microclimate in urban environments and assessing its influence on the performance of surrounding buildings | ENERGY AND BUILDINGS |
| Artículo | 2004 | Numerical investigation of the regularity of the pressure for the primitive equations of the ocean | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2004 | Synthesis, structure, magnetic and electrochemical properties of an oxydiacetate iron(II) complex | INORGANICA CHIMICA ACTA |
| Artículo | 2003 | A family of stable numerical solvers for the shallow water equations with source terms | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2003 | Reactive power optimization and voltage control in the Western Algerian transmission system: a hybrid approach | ELECTRIC POWER SYSTEMS RESEARCH |
| Artículo | 2003 | Recycling potential of coal fly ash and titanium waste as new fireproof products | CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2003 | Structural and electronic features of Group 8 metal complexes containing one alpha-diiminobenzene chelate ligand | INORGANICA CHIMICA ACTA |
| Artículo | 2003 | Structural characterisation of SiC/SiCf composites exposed to chemical interaction with Be at high temperature | FUSION ENGINEERING AND DESIGN |
| Artículo | 2003 | Unexpected reactivity of 2,5-dimethylthiophene towards Tp(Me2)Ir(C2H4)(2) | INORGANICA CHIMICA ACTA |
| Artículo | 2002 | Five-coordinate aminophosphine platinum(II) complexes containing cysteine derivatives as ligands | INORGANICA CHIMICA ACTA |
| Artículo | 2001 | Low cost rare earth elements deposition method for enhancing the oxidation resistance at high temperature of Cr2O3 and Al2O3 forming alloys | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2001 | NH3 adsorption over lanthanide doped V2O5/Al2O3 catalysts | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2000 | A unified analysis of mixed and stabilized finite element solutions of Navier-Stokes equations | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2000 | Evolution of the magnetic behavior of the Co subsystem in YCo3 caused by small variations in stoichiometry and Al substitution | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 1999 | A simple local smoothing scheme in strongly singular boundary integral representation of potential gradient | COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 1999 | An EXAFS study of Mo(VI) and Mo(V) complexes with proline dithiocarbamate | INORGANICA CHIMICA ACTA |
| Artículo | 1998 | Homology predicted structure and comparison with the secondary structure from NMR data for plastocyanin from the cyanobacterium Synechocystis sp. PCC 6803 | INORGANICA CHIMICA ACTA |
| Artículo | 1998 | Mononuclear and binuclear o-xylylene derivatives of Pd(II) | INORGANICA CHIMICA ACTA |
| Artículo | 1998 | Photosensitized electron transfer reactions of cytochrome c(4) from Pseudomonas stutzeri with flavins and methyl viologen | INORGANICA CHIMICA ACTA |
| Artículo | 1998 | Synthesis and characterisation of rhodium(I) complexes containing the dihydrobis(pyrazolyl)borate ligands [H2B(pz ')(2)](-). The X-ray structures of Bp*Rh(C2H4)(2) and BpRh(PPh3)(2) (Bp = H2B(pz)(2); Bp* = H2B(3,5-Me-2-pz)(2) | INORGANICA CHIMICA ACTA |
| Artículo | 1998 | Synthesis and reactivity of bis(ethylene)-phosphite complexes of molybdenum(0) | INORGANICA CHIMICA ACTA |
| Artículo | 1997 | Evidence of a ''notch effect'' in microwave surface resistance versus deposition temperature for Y1Ba2Cu3O7-x thin film on MgO (100) substrate | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 1997 | Mechanism of oxygenation of YBaCuO thin films during in situ growth by cathodic sputtering: Effect of atomic oxygen | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 1996 | Short-range order of yttria doped zirconia powders studied by X-ray absorption .2. | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 1995 | Short-range order of yttria-doped zirconia powders study by x-ray-absorption .1. | JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 1993 | Role of ionic strength in the binuclear complex formation between aquopentacyanoferrate(II) and tetraamminepyrazinecarboxylatocobalt(III) ions | INORGANICA CHIMICA ACTA |
| Artículo | 1992 | Specific cation solute interactions as a major contributor to the salt effects on charge-transfer transitions | INORGANICA CHIMICA ACTA |
| Artículo | 1991 | Salt effects on charge-transfer transitions | INORGANICA CHIMICA ACTA |
| Artículo | 1989 | Activation energy spectra for the relaxation phenomena in non-crystalline samples of the Se100-xBix system (x≤ 3.4) | MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 1987 | Characterization of lanthanide oxide-promoted rhodium alumina catalysts | INORGANICA CHIMICA ACTA |
| Ponencia | 1984 | Lanthanide Oxides: Effect of CO2 on the Yb2O3 Hydration | INORGANICA CHIMICA ACTA |
| Ponencia | 1984 | Lanthanide Oxides: Yb2O3 Hydration | INORGANICA CHIMICA ACTA |
