| Artículo | 2024 |
A phase field approach to fracture for hyperelastic and visco-hyperelastic materials applied to pre-stressed cylindrical structures
|
Mechanics of Advanced Materials and Structures |
| Artículo | 2024 |
On the (lack of) representativeness of quasi-static variational fracture models for unstable crack propagation
|
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS |
| Artículo | 2024 |
SIMP Phase-field topology optimization framework to maximize fracture resistance in FGMs
|
COMPOSITE STRUCTURES |
| Artículo | 2023 |
A continuum large-deformation theory for the coupled modeling of polymer–solvent system with application to PV recycling
|
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE |
| Artículo | 2023 |
A coupled approach to predict cone-cracks in spherical indentation tests with smooth or rough indenters
|
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS |
| Capítulo | 2023 |
A modeling framework for the analysis of instabilities and delamination in composite shells
|
Computational and Experimental Methods in Structures |
| Artículo | 2023 |
A multifield coupled thermo-chemo-mechanical theory for the reaction-diffusion modeling in photovoltaics
|
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING |
| Ponencia | 2023 |
A phase field model for material and fracture nonlinearities using a modified Mohr-Coulomb model: Application to the prediction of fracture events in high performance concrete
|
AIP Conference Proceedings |
| Artículo | 2023 |
A phase-field fracture model for fatigue using locking-free solid shell finite elements: Analysis for homogeneous materials and layered composites
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Corrección | 2023 |
Corrigendum to “Recent progress, challenges and outlook for multidisciplinary structural optimization of aircraft and aerial vehicles” [Prog. Aero. Sci. 135 (2022) 100861] (Progress in Aerospace Sciences (2022) 135, (S0376042122000537), (10.1016/j.paerosci.2022.100861))
|
Progress in Aerospace Sciences |
| Artículo | 2023 |
Coupled versus energetic nonlocal failure criteria: a case study on the crack onset from circular holes under biaxial loadings
|
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS |
| Artículo | 2023 |
Crack impinging on a curved weak interface: penetration or deflection?
|
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS |
| Artículo | 2023 |
Experimental characterization of Mode I fracture toughness of the undisturbed Guadalquivir Blue Marl: Effect of suction
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2023 |
Locking treatment of penalty-based gradient-enhanced damage formulation for failure of compressible and nearly incompressible hyperelastic materials
|
COMPUTATIONAL MECHANICS |
| Artículo | 2023 |
Micro-mechanical analysis of composite materials using Phase-Field models of brittle fracture
|
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS |
| Artículo | 2023 |
Modeling fracture of multidirectional thin-ply laminates using an anisotropic phase field formulation at the macro-scale
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
| Artículo | 2023 |
On the helical buckling of anisotropic tubes with application to arteries
|
MECHANICS RESEARCH COMMUNICATIONS |
| Capítulo | 2023 |
Simuladores de prácticas de laboratorio en mecánica de medios continuos como complemento formativo a las prácticas reales en el laboratorio
|
Mejorando la enseñanza a través de la innovación educativa |
| Artículo | 2022 |
A combined phase-field and cohesive zone model approach for crack propagation in layered structures made of nonlinear rubber-like materials
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2022 |
A humidity dose-CZM formulation to simulate new end-of-life recycling methods for photovoltaic laminates
|
ENGINEERING FRACTURE MECHANICS |
| Artículo | 2022 |
An extended invariant approach to laminate failure of fibre-reinforced polymer structures
|
Aeronautical Journal |
| Artículo | 2022 |
Computational modelling of hydrogen assisted fracture in polycrystalline materials
|
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
| Ponencia | 2022 |
Diferentes enfoques para la fractura dúctil basados en la metodología phase-field: Aplicación a modelos de plasticidad asociada y no asociada
|
Revista española de mecánica de la fractura |
| Artículo | 2022 |
Dynamic formulation of phase field fracture in heterogeneous media with finite thickness cohesive interfaces
|
COMPUTATIONAL MATERIALS SCIENCE |
| Artículo | 2022 |
Experimental evaluation of the similarity in the interface fracture energy between PMMA/epoxy/PMMA and PMMA/epoxy joints
|
ENGINEERING FRACTURE MECHANICS |
| Ponencia | 2022 |
Extended failure models for global and local analyses of composite aerostructures
|
ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability |
| Ponencia | 2022 |
Finite fracture mechanics from the macro- to the micro-scale. Comparison with the phase field model
|
Procedia Structural Integrity |
| Capítulo | 2022 |
From the pioneering contributions by Wriggers to recent advances in computational tribology
|
Current Trends and Open Problems in Computational Mechanics |
| Artículo | 2022 |
Hygro-thermo-mechanical modeling of thin-walled photovoltaic laminates with polymeric interfaces
|
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS |
| Artículo | 2022 |
Multi-phase field approach to tensile fracture and compressive crushing in grained heterogeneous materials
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2022 |
Non-linear thermoelastic analysis of thin-walled structures with cohesive-like interfaces relying on the solid shell concept
|
FINITE ELEMENTS IN ANALYSIS AND DESIGN |
| Artículo | 2022 |
Nonlinear thermo-elastic phase-field fracture of thin-walled structures relying on solid shell concepts
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2022 |
On different 3D printing methods and fracture performance in DCB composite specimens including structured interfaces
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Ponencia | 2022 |
On different 3D printing methods and fracture performance in dcb composite specimens including structured interfaces
|
Revista española de mecánica de la fractura |
| Ponencia | 2022 |
On the effect of the interface radius on the ability to arrest cracks of curved weak interfaces
|
Revista española de mecánica de la fractura |
| Artículo | 2022 |
Phase field model for fracture analysis of functionally graded power-based shell structures
|
Mechanics of Advanced Materials and Structures |
| Artículo | 2022 |
Phase field modeling of brittle fracture in large-deformation solid shells with the efficient quasi-Newton solution and global–local approach
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Revisión | 2022 |
Recent progress, challenges and outlook for multidisciplinary structural optimization of aircraft and aerial vehicles
|
Progress in Aerospace Sciences |
| Artículo | 2022 |
Simulation of bridging mechanisms in complex laminates using a hybrid PF-CZM method
|
Mechanics of Advanced Materials and Structures |
| Artículo | 2022 |
Thermo-elastic solid shell formulation with phase field fracture for thin-walled FGMs
|
THIN-WALLED STRUCTURES |
| Artículo | 2021 |
A framework for the analysis of fully coupled normal and tangential contact problems with complex interfaces
|
FINITE ELEMENTS IN ANALYSIS AND DESIGN |
| Artículo | 2021 |
A multi phase-field-cohesive zone model for laminated composites: application to delamination migration
|
COMPOSITE STRUCTURES |
| Artículo | 2021 |
Computational bifurcation analysis for hyperelastic residually stressed tubes under combined inflation and extension and aneurysms in arterial tissue
|
FINITE ELEMENTS IN ANALYSIS AND DESIGN |
| Ponencia | 2021 |
Efecto de tamaño en laminados cruzados: Estudio de la transición entre escalas de la iniciación de grietas usando un enfoque variacional de la mecánica de la fractura
|
Revista española de mecánica de la fractura |
| Editorial | 2021 |
Forewords
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2021 |
Modelling of residually stressed, extended and inflated cylinders with application to aneurysms
|
MECHANICS RESEARCH COMMUNICATIONS |
| Artículo | 2021 |
Phase field modeling of fracture in Functionally Graded Materials: Γ-convergence and mechanical insight on the effect of grading
|
THIN-WALLED STRUCTURES |
| Ponencia | 2021 |
Tenacidad a la fractura en la interfaz en juntas adhesivas. Comparación experimental entre PMMA/PMMA unido por epoxi y PMMA/epoxi
|
Revista española de mecánica de la fractura |
| Artículo | 2020 |
A consistent finite displacement and rotation formulation of the Linear Elastic Brittle Interface Model for triggering interlaminar damage in fiber-reinforced composites
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2020 |
A multi phase-field fracture model for long fiber reinforced composites based on the Puck theory of failure
|
COMPOSITE STRUCTURES |
| Artículo | 2020 |
A phase field approach enhanced with a cohesive zone model for modeling delamination induced by matrix cracking
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2020 |
A phase field approach for damage propagation in periodic microstructured materials
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Artículo | 2020 |
A phase field approach for ductile fracture of short fibre reinforced composites
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Ponencia | 2020 |
A procedure for the estimation of the shape imperfections of a composite panel in order to reproduce its postbuckling evolution
|
ECCM 2018 - 18th European Conference on Composite Materials |
| Artículo | 2020 |
A variational approach with embedded roughness for adhesive contact problems
|
Mechanics of Advanced Materials and Structures |
| Capítulo | 2020 |
Computational methods for contact problems with roughness
|
Modeling and simulation of tribological problems in technology |
| Artículo | 2020 |
Crack arrest through branching at curved weak interfaces: An experimental and numerical study
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2020 |
In-situ strength effects in long fibre reinforced composites: A micro-mechanical analysis using the phase field approach of fracture
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2020 |
Numerical study of interface cracking in composite structures using a novel geometrically nonlinear Linear Elastic Brittle Interface Model: Mixed-mode fracture conditions and application to structured interfaces
|
COMPOSITE STRUCTURES |
| Artículo | 2019 |
A computational model for fiber-reinforced composites: hyperelastic constitutive formulation including residual stresses and damage
|
COMPUTATIONAL MECHANICS |
| Artículo | 2019 |
A general non-local constitutive relation for residually stressed solids
|
MECHANICS RESEARCH COMMUNICATIONS |
| Artículo | 2019 |
A micromechanical analysis of inter-fiber failure in long reinforced composites based on the phase field approach of fracture combined with the cohesive zone model
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Artículo | 2019 |
A phase field approach to simulate intralaminar and translaminar fracture in long fiber composite materials
|
COMPOSITE STRUCTURES |
| Artículo | 2019 |
Analysis of 3D Printed Trapezoidal Interfaces by Means of a Novel Cohesive-Based Analytical Approach
|
JOURNAL OF MULTISCALE MODELING |
| Artículo | 2019 |
Bifurcation and post-bifurcation of an inflated and extended residually-stressed circular cylindrical tube with application to aneurysms initiation and propagation in arterial wall tissue
|
FINITE ELEMENTS IN ANALYSIS AND DESIGN |
| Artículo | 2019 |
Constitutive modeling framework for residually stressed viscoelastic solids at finite strains
|
MECHANICS RESEARCH COMMUNICATIONS |
| Artículo | 2019 |
Crack Patterns in Heterogenous Rocks Using a Combined Phase Field-Cohesive Interface Modeling Approach: A Numerical Study
|
ENERGIES |
| Ponencia | 2019 |
Enhancing the fracture toughness of adhesively bonded joints using 3D printed structured interfaces
|
ECCM 2018 - 18th European Conference on Composite Materials |
| Artículo | 2019 |
Finite strain analysis of limestone/basaltic magma interaction and fracture: Low order mixed tetrahedron and remeshing
|
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS |
| Artículo | 2019 |
Fracture analysis of thin films on compliant substrates: A numerical study using the phase field approach of fracture
|
International Journal of Pressure Vessels and Piping |
| Artículo | 2019 |
Fracture energy characterisation of a structured interface by means of a novel J-Integral procedure
|
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN |
| Artículo | 2019 |
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2019 |
Surface-based and solid shell formulations of the 7-parameter shell model for layered CFRP and functionally graded power-based composite structures
|
Mechanics of Advanced Materials and Structures |
| Artículo | 2019 |
The steady-state Archard adhesive wear problem revisited based on the phase field approach to fracture
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Artículo | 2018 |
A three dimensional adaptive multiscale method for crack growth in Silicon
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2018 |
Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation
|
ENGINEERING FRACTURE MECHANICS |
| Artículo | 2018 |
Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field-cohesive zone model approach
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2018 |
Fracture resistance of 3D printed adhesively bonded DCB composite specimens using structured interfaces: Experimental and theoretical study
|
COMPOSITE STRUCTURES |
| Artículo | 2018 |
General constitutive updating for finite strain formulations based on assumed strains and the Jacobian
|
FINITE ELEMENTS IN ANALYSIS AND DESIGN |
| Artículo | 2018 |
Influencia de las interfases estructuradas en la tenacidad a la fractura de uniones adhesivas en especímenes DCB fabricados mediante impresión 3D: estudio experimental y analítico
|
Anales de Mecánica de la Fractura |
| Ponencia | 2018 |
Invariant-Based Finite Strain Anisotropic Material Model for Fiber-Reinforced Composites
|
Lecture Notes in Applied and Computational Mechanics |
| Artículo | 2018 |
Mixed-mode failure of interfaces studied by the 2D linear elastic-brittle interface model: Macro- and micro-mechanical finite-element applications in composites
|
JOURNAL OF ADHESION |
| Artículo | 2018 |
Modeling complex crack paths in ceramic laminates: A novel variational framework combining the phase field method of fracture and the cohesive zone model
|
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY |
| Artículo | 2018 |
Peeling of thick adhesive interfaces: The role of dynamics and geometrical nonlinearity
|
MECHANICS RESEARCH COMMUNICATIONS |
| Revisión | 2018 |
Recent advancements on the phase field approach to brittle fracture for heterogeneous materials and structures
|
Advanced Modeling and Simulation in Engineering Sciences |
| Artículo | 2018 |
Simulation of the Mechanical Response of Thin-Ply Composites: From Computational Micro-Mechanics to Structural Analysis
|
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
| Ponencia | 2018 |
Snap-Through of Bistable Configurations Generated from Variable Stiffness Composites
|
Lecture Notes in Applied and Computational Mechanics |
| Artículo | 2018 |
Thermally induced multistable configurations of variable stiffness composite plates: Semi-analytical and finite element investigation
|
COMPOSITE STRUCTURES |
| Artículo | 2017 |
A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model
|
COMPOSITE STRUCTURES |
| Artículo | 2017 |
A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
| Artículo | 2017 |
A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects
|
COMPOSITES PART B-ENGINEERING |
| Artículo | 2017 |
A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates
|
COMPOSITES PART B-ENGINEERING |
| Ponencia | 2017 |
A phase field method based three dimensional global-local modelling framework for fracture in rocks
|
ICF 2017 - 14th International Conference on Fracture |
| Artículo | 2017 |
A thermodynamically consistent framework to couple damage and plasticity microplane-based formulations for fracture modeling: development and algorithmic treatment
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Ponencia | 2017 |
Complex crack paths in layered composite materials: Interaction between phase field and interfaces
|
ICF 2017 - 14th International Conference on Fracture |
| Artículo | 2017 |
Concurrently coupled solid shell-based adaptive multiscale method for fracture
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2017 |
Ensayos de pull-off sobre probetas con rigidizadores en T
|
Materiales Compuestos |
| Artículo | 2017 |
Estudio experimental de interfases no convencionales con patrones trapezoidales
|
Materiales Compuestos |
| Artículo | 2017 |
Experimental failure investigation of pull-off tests of single T-stiffened composite specimens
|
COMPOSITE STRUCTURES |
| Artículo | 2017 |
Finite-strain low order shell using least-squares strains and two-parameter thickness extensibility
|
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS |
| Artículo | 2017 |
Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation
|
COMPUTATIONAL MECHANICS |
| Ponencia | 2017 |
Phase field modeling of brittle fracture for solid shells at large deformations
|
ICF 2017 - 14th International Conference on Fracture |
| Artículo | 2017 |
Revisiting the problem of a crack impinging on an interface: A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 2017 |
Strength prediction of notched thin ply laminates using finite fracture mechanics and the phase field approach
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Artículo | 2016 |
A computational framework for the interplay between delamination and wrinkling in functionally graded thermal barrier coatings
|
COMPUTATIONAL MATERIALS SCIENCE |
| Artículo | 2016 |
A finite element framework for the interplay between delamination and buckling of rubber-like bi-material systems and stretchable electronics
|
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY |
| Ponencia | 2016 |
A finite thickness interface element for composite delamination
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Artículo | 2016 |
A two-way loose coupling procedure for investigating the buckling and damage behaviour of stiffened composite panels
|
COMPOSITE STRUCTURES |
| Artículo | 2016 |
Adhesive behaviour of bonded paper layers: Mechanical testing and statistical modelling
|
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
| Artículo | 2016 |
An invariant-based anisotropic material model for short fiber-reinforced thermoplastics: Coupled thermo-plastic formulation
|
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING |
| Artículo | 2016 |
Application and finite element implementation of 7-parameter shell element for geometrically nonlinear analysis of layered CFRP composites
|
COMPOSITE STRUCTURES |
| Ponencia | 2016 |
Damage simulations in a composite Ω-stiffened panel in postbuckling regime
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Capítulo | 2016 |
Damage simulations in composite structures in the presence of stress gradients
|
Modeling Damage, Fatigue and Failure of Composite Materials |
| Artículo | 2016 |
Damage tolerance of composite runout panels under tensile loading
|
COMPOSITES PART B-ENGINEERING |
| Artículo | 2016 |
Finite deformation model for short fiber reinforced composites: Application to hybrid metal-composite clinching joints
|
COMPOSITE STRUCTURES |
| Artículo | 2016 |
Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell element
|
COMPOSITE STRUCTURES |
| Artículo | 2016 |
Modelo de interfase elastica lineal fragil (MIELF) aplicado a problemas tridimensionales con crecimiento de grietas en modo mixto
|
Anales de Mecánica de la Fractura |
| Artículo | 2015 |
A constitutive-based element-by-element crack propagation algorithm with local mesh refinement
|
COMPUTATIONAL MECHANICS |
| Artículo | 2015 |
An anisotropic large displacement cohesive zone model for fibrillar and crazing interfaces
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
| Ponencia | 2015 |
An invariant-based anisotropic thermo-plastic material model for short fiber reinforced thermoplastics
|
ICCM International Conferences on Composite Materials |
| Artículo | 2014 |
A consistent interface element formulation for geometrical and material nonlinearities
|
COMPUTATIONAL MECHANICS |
| Ponencia | 2014 |
Composite plates modeling strategies for the estimation of transverse stresses
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Failure analysis of a CFRP run-out configuration with butt-strap joint
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Failure analysis of skin-stringer interfaces
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Material characterization for FEA of the clinching process of short fiber reinforced thermoplastics with an aluminum sheet
|
Advanced Materials Research |
| Ponencia | 2014 |
Material modelling of short fiber reinforced thermoplastic for the FEA of a clinching test
|
Procedia CIRP |
| Ponencia | 2014 |
Origin, control, and predictability of optical rogue waves in semiconductor lasers
|
Nonlinear Photonics, NP 2014 |
| Artículo | 2013 |
A composite runout specimen subjected to tension-compression loading conditions: Experimental and global-local finite element analysis
|
COMPOSITE STRUCTURES |
| Ponencia | 2013 |
Postbuckling analysis of a composite cylindrical panel with frames and omega stringers
|
ICCM International Conferences on Composite Materials |
| Ponencia | 2012 |
Analysis of a stringer run-out concept including damage initiation and evolution at the interfaces
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
| Artículo | 2012 |
Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces
|
COMPOSITES PART B-ENGINEERING |
| Ponencia | 2012 |
On the use of three dimensional material laws in the analyses of Functionally Graded shells
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
| Artículo | 2012 |
Postbuckling behavior of a pressurized stiffened composite panel - Part II: Numerical analysis. Effect of the geometrical imperfections
|
COMPOSITE STRUCTURES |
| Artículo | 2012 |
Postbuckling behaviour of a pressurized stiffened composite panel - Part I: Experimental study
|
COMPOSITE STRUCTURES |
