Ver Investigador - - Prisma - Unidad de Bibliometría

Isabel Montealegre Meléndez

Profesora Titular de Universidad
imontealegre@us.es
Área de conocimiento: Ciencia de los Materiales e Ingeniería Metalúrgica
Departamento: Ingeniería y Ciencia de los Materiales y del Transporte
Grupo: METALURGIA E INGENIERIA DE LOS MATERIALES - TEP-123 (Universidad de Sevilla)
Prog. doctorado: Programa de Doctorado en Instalaciones y Sistemas para la Industria (2011)
Tipo Año Título Fuente
Ponencia2023 Manufacturing Of Hastelloy C-22 Specimens Via Plasma Metal Deposition To Determine The Influence Of The Processing Parameters On The Final Properties Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023
Artículo2023 Understanding the synergetic effects of mechanical milling and hot pressing on bimodal microstructure and tribo-mechanical behavior in porous Ti structures Journal of Materials Research and Technology
Artículo2022 Comparative study of the behaviour of several reinforcement materials in titanium matrix produced by Rapid Sinter Pressing Manufacturing Revista de metalurgia
Capítulo2022 Diseño del Ciclo de Mejora en el Aula (CIMA) en Ingeniería de la Prevención de Riesgos Laborales Ciclos de mejora en el aula. Año 2021: experiencias de innovación docente de la Universidad de Sevilla
Artículo2022 Influence of processing conditions on the mechanical properties of 17-4PH specimens produced by additive manufacturing MACHINES
Capítulo2022 Plasma Metal Deposition for Metallic Materials Advanced Additive Manufacturing
Capítulo2021 Ciclo de mejora en Ingeniería de la Prevención de Riesgos Laborales Ciclos de mejora en el aula. Año 2020 Experiencias de innovación docente de la Universidad de Sevilla
Capítulo2021 Desarrollo y estudio de piezas con geometrías complejas de aleaciones de titanio fabricadas a partir de polvo y alambre mediante la técnica aditiva de fusión de metal mediante plasma Sinergias en la investigación en STEM
Capítulo2021 Estudio del procesamiento de la aleación de níquel Hastelloy C-22 mediante la técnica de fabricación aditiva Plasma Metal Deposition (PMD) Sinergias en la investigación en STEM
Artículo2021 Influence of starting powders on the final properties of W-Cu alloys manufactured through rapid sinter pressing technique POWDER METALLURGY
Artículo2020 Effect of processing atmosphere and secondary operations on the mechanical properties of additive manufactured AISI 316L stainless steel by plasma metal deposition METALS
Capítulo2020 Fabricación de Hastelloy C-22 mediante plasma transferred ARC La investigación de hoy, el futuro de mañana
Capítulo2020 Investigation of titanium composites produced via plasma transferred ARC: influence of the processing parameters on the composites’ microstructures La investigación de hoy, el futuro de mañana
Artículo2020 Mirada microscópica de los materiales: metalografía de aceros Portal De Realidad Extendida de la Universidad de Sevilla
Ponencia2020 Preliminary study of the processing parameters effect on the properties of Ti6Al4V specimens fabricated via additive manufacturing Euro PM 2018 Congress and Exhibition
Artículo2020 Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere METALS
Artículo2020 Reaction layer analysis of in situ reinforced titanium composites: Influence of the starting material composition on the mechanical properties METALS
Ponencia2020 Study on Processing Nickel Alloy Hastelloy C-22 by Additive Manufacturing Technique Plasma Metal Deposition (PMD) Euro PM 2019 Congress and Exhibition
Artículo2019 Effect of heat treatment on apatite coatings deposited on pre-calcified titanium substrates INTERNATIONAL JOURNAL OF MATERIALS RESEARCH
Artículo2019 Electron microscopy characterization of the reaction layer in titanium composites reinforced with B4C particles and the effect of the presence of aluminium MATERIALS RESEARCH EXPRESS
Capítulo2019 Estudio preliminar de los parámetros de fabricación en las propiedades finales de piezas de titanio comercialmente puro con geometrías sencillas producidos mediante la técnica de “additive manufacturing” Avances en la investigación en ciencia e ingeniería
Capítulo2019 Estudio y comparativa de la influencia del tipo de refuerzo en materiales compuestos de base titanio fabricados por técnicas de compactación caliente inductiva Avances en la investigación en ciencia e ingeniería
Capítulo2019 In situ titanium composites: XRD study of secondary phases tied to the processing conditions and starting materials Inelastic X-Ray scattering and X-Ray powder diffraction applications
Artículo2019 Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique APPLIED SCIENCES-BASEL
Ponencia2019 Processing of 17-4PH by additive manufacturing using a plasma metal deposition (PMD) technique Euro PM 2019 Congress and Exhibition
Ponencia2019 Secondary phases study in titanium matrix reinforced with TiB2 Euro PM 2019 Congress and Exhibition
Libro2018 Colección de problemas resueltos de ciencia de materiales aeroespaciales Colección de problemas resueltos de ciencia de materiales aeroespaciales
Artículo2018 Improvement of the balance between a reduced stress shielding and bone rit ingrowth by bioactive coatings onto porous titanium substrates SURFACE & COATINGS TECHNOLOGY
Artículo2018 Microstructural and XRD analysis and study of the properties of the system Ti-TiAl-B4C processed under different operational conditions METALS
Artículo2018 Powder-materials impact on nanoparticle-reinforced Ti-6Al-4V matrix composites produced via inductive hot pressing International Journal of Materials and Product Technology
Artículo2017 Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys MATERIALS
Artículo2017 Analysis of the Microstructure and Mechanical Properties of Titanium-Based Composites Reinforced by Secondary Phases and B4C Particles Produced via Direct Hot Pressing MATERIALS
Artículo2017 Study of the Influence of TiB Content and Temperature in the Properties of In Situ Titanium Matrix Composites METALS
Ponencia2017 Temperature effect on the properties of titanium matrices with 20%vol. Ti-Al, reinforced by 50% vol. of B4C Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition
Ponencia2017 Ti/B4C composites prepared by in situ reaction using inductive hot pressing Key engineering materials
Ponencia2016 Development of Ti-MMCs by the use of different reinforcements via conventional Hot-Pressing Key engineering materials
Ponencia2016 Fabricación mediante innovadoras técnicas pulvimetalúrgicas de materiales compuestos de matriz ligera III Jornada de investigación y postgrado: Libro de Actas
Artículo2016 Influence of Sintering Temperature on the Microstructure and Mechanical Properties of In Situ Reinforced Titanium Composites by Inductive Hot Pressing MATERIALS
Ponencia2016 Influence of the particle size and raw materials in W-Cu Alloys manufactured Via rapid sinter pressing World PM 2016 Congress and Exhibition
Ponencia2016 Study of titanium metal matrix composites reinforced by boron carbides and amorphous boron particles produced via direct hot pressing Key engineering materials
Ponencia2016 Titanium matrix composites with high specific stiffness Key engineering materials
Artículo2014 Designing, processing and characterisation of titanium cylinders with graded porosity: An alternative to stress-shielding solutions MATERIALS & DESIGN
Artículo2012 Microstructural evolution and mechanical properties of the Ti-6Al-4V alloy produced by vacuum hot-pressing MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Ponencia2011 Effect of mixing parameters on the final properties of titanium composites reinforced with carbon nanotubes Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011
Artículo2011 Influence of nano-reinforcements on the mechanical properties and microstructure of titanium matrix composites COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2010 Consolidation of titanium matrix composites to maximum density by different hot pressing techniques MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Artículo2009 Effect of starting powder grade on sintering and properties of PM titanium metal matrix composites POWDER METALLURGY
Ponencia2008 Influence of the hot pressing parameters on mechanical and microstructural properties of titanium matrix composites Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008
Este investigador no ha dirigido/tutorizado tesis

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
07/06/2021 31/12/2022 Investigador/a Estudio de materiales antichispa para desbrozadoras forestales (4179/1106) SEANTO, S.L. (Desconocido)
04/11/2019 04/12/2020 Investigador/a Analysis of specimens produced by advanced powder metallurgy (AE-1957/08/2019) RHP-Technology GmbH (Desconocido)
04/11/2019 04/12/2020 Responsable Behaviour of different specimens produced by fused filament fabrication (fff) and Feedstock printer (extrusion) (AE-1958/08/2019) RHP-Technology GmbH (Desconocido)
01/09/2018 01/09/2019 Investigador/a Determinación de propiedades mecánicas de muestras pulvimetalúrgicas (AE-1840/08/2018) RHP-Technology GmbH (Desconocido)
01/09/2018 01/09/2019 Responsable Caracterización de muestras sinterizadas (AE-1841/08/2018) RHP-Technology GmbH (Desconocido)
01/06/2018 01/06/2019 Investigador/a Ensayos de caracterización Pulvimetalurgica (AE-1822/08/2018) RHP-Technology GmbH (Desconocido)
10/12/2014 15/01/2015 Investigador/a Informe sobre la corrosividad de un terreno situado en Tarapacá (Chile) (ES-1371/2014) SolarPack Chile, S.A.C. (Desconocido)
14/11/2014 14/11/2015 Responsable Caracterización de componenetes pulvimetalúrgicos (AE-1343/2014) RHP-Technology GmbH (Desconocido)

Ayudas

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/11/2020 31/10/2022 Investigador/a Entrenamiento avanzado en materiales para superficies solares duraderas (EIN2020-112163) Ministerio de Ciencia e Innovación (Nacional)
01/03/2012 01/05/2012 Responsable Estancia: Centro Tecnológico de Investigación RHP- Technology, Seibersdorf, Austria, 60 días (PP2011-05-129) Universidad de Sevilla (Local)
01/07/2011 30/06/2013 Responsable IV Congreso Nacional de Pulvimetalurgia, Sevilla 2012 (MAT2011-14762-E) Ministerio de Ciencia e Innovación (Nacional)
El investigador no tiene ningún resultado de investigación asociado