Ver Investigador - - Prisma - Unidad de Bibliometría

Jose David Rios Jimenez

Profesor Ayudante Doctor
jdrios@us.es
Área de conocimiento: Mecánica de Medios Continuos y Teoría de Estructuras
Departamento: Mecánica de Medios Continuos y Teoría de Estructuras
Grupo: Sin Grupo
Tipo Año Título Fuente
Artículo2024 Estudio numérico del comportamiento a cortante de vigas de hormigón de ultra altas prestaciones Hormigon y Acero
Artículo2024 Investigando correlaciones entre traslucidez y resistencia a desgaste en vitrocerámicos dentales a base de silicato de litio BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2023 Comportamiento en fractura de un hormigón de muy alta resistencia con refuerzo multiescala Revista española de mecánica de la fractura
Artículo2023 Development of Mortars That Use Recycled Aggregates from a Sodium Silicate Process and the Influence of Graphene Oxide as a Nano-Addition. MATERIALS
Artículo2023 Efecto de la adición de nanosílice en las propiedades mecánicas de un hormigón de muy alta resistencia Revista española de mecánica de la fractura
Artículo2023 Effect of different ashes from biomass olive pomace on the mechanical and fire properties of gypsum-based materials Revista de la Construcción
Artículo2023 Experimental and Numerical Flexural-Torsional Performance of Thin-Walled Open-Ended Steel Vertical Pile Foundations Subjected to Lateral Loads BUILDINGS
Artículo2023 Exploring the impact of graphene oxide on mechanical and durability properties of mortars incorporating demolition waste: micro and nano-pore structure effects MATERIALES DE CONSTRUCCION
Artículo2023 Modified parametric hurricane wind model to improve the asymmetry in the region of maximum winds OCEAN ENGINEERING
Artículo2022 Estudio del comportamiento de hormigones de muy alta resistencia sometidos a cargas de choque térmico Hormigon y Acero
Artículo2022 Morphological analysis of porosity and sound absorption in sustainable materials from rice husk Building acoustics
Artículo2022 Sound absorbing porous concretes composed of different solid wastes European Journal Of Environmental And Civil Engineering
Artículo2021 Effect of moderate temperatures on compressive strength of ultra-high-performance concrete: a microstructural analysis CEMENT AND CONCRETE RESEARCH
Artículo2021 Experimental study of a noise reducing barrier made of fly ash MATERIALES DE CONSTRUCCION
Artículo2021 Flexural fatigue behaviour of a heated ultra-high-performance fibre-reinforced concrete CONSTRUCTION AND BUILDING MATERIALS
Artículo2020 Development of a paste for passive fire protection mainly composed of granulated blast furnace slag ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY
Artículo2020 Effect of polypropylene fibers on the fracture behavior of heated ultra-high performance concrete INTERNATIONAL JOURNAL OF FRACTURE
Artículo2020 Microstructural analyses of the addition of PP fibres on the fracture properties of high-strength self-compacting concrete by X-ray computed tomography CONSTRUCTION AND BUILDING MATERIALS
Artículo2019 Analysis of the mechanical and fracture behavior of heated ultra-high-performance fiber-reinforced concrete by X-ray computed tomography CEMENT AND CONCRETE RESEARCH
Artículo2019 Analysis of the tensile fracture properties of ultra-high-strength fiber-reinforced concrete with different types of steel fibers by X-ray tomography MATERIALS & DESIGN
Artículo2019 Analysis of the Utilization of Air-Cooled Blast Furnace Slag as Industrial Waste Aggregates in Self-Compacting Concrete SUSTAINABILITY
Ponencia2019 Efectos de la temperatura y la presencia de fibras de acero en la microestructura de hormigones de ultra altas prestaciones y su influencia en el comportamiento en fractura Anales de Mecánica de la Fractura
Artículo2019 Porous Structure by X-Ray Computed Tomography and Sound Absorption in Pervious Concretes with Air Cooled Blast Furnace Slag as Coarse Aggregate Acoustics Australia
Ponencia2019 Study on ligaments’ areas differences between different sizes of modCT concrete specimens Advances and Trends in Engineering Sciences and Technologies III- Proceedings of the 3rd International Conference on Engineering Sciences and Technologies, ESaT 2018
Ponencia2018 Aprendizaje centrado en el proyecto de estructuras adaptados a la enseñanza universitaria CUIEET. XXVI Congreso universitario de innovación educativa en la enseñanzas técnicas (2018)
Artículo2018 Behavior of High-Strength Polypropylene Fiber-Reinforced Self-Compacting Concrete Exposed to High Temperatures JOURNAL OF MATERIALS IN CIVIL ENGINEERING
Ponencia2018 Determination of Woehler curves in flexural fatigue of a very high strength concrete subjected to high temperature V CONGRESO IBEROAMERICANO DE HORMIGON AUTOCOMPACTANTE Y HORMIGONES ESPECIALES
Artículo2018 Effect of mix design on the size-independent fracture energy of normal- and high-strength self-compacting concrete MATERIALES DE CONSTRUCCION
Ponencia2018 Probabilistic fatigue analysis of ultra-high-performance fibre-reinforced concrete under thermal effects 12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018)
Artículo2017 Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens FRATTURA ED INTEGRITA STRUTTURALE
Ponencia2017 Effect of the load eccentricity on fracture behaviour of cementitious materials subjected to the modified compact tension test Solid State Phenomena
Artículo2017 Influencia del tiempo de exposición a temperaturas en el comportamiento en fractura de hormigones autocompactantes reforzados con fibras de PP VII Congreso Internacional de Estructuras: [resúmenes publicados en la revista Hormigón y Acero (ISSN 0439-5689), v. 68, especial Congreso, junio 2017]
Artículo2017 Numerical modelling of the shear-bond behaviour of composite slabs in four and six-point bending tests ENGINEERING STRUCTURES
Artículo2017 Probabilistic Flexural Fatigue in Plain and Fiber-Reinforced Concrete MATERIALS
Artículo2017 Propiedades mecánicas en fatiga de un hormigón de muy altas prestaciones mediante ensayos de flexión en 3 puntos VII Congreso Internacional de Estructuras: [resúmenes publicados en la revista Hormigón y Acero (ISSN 0439-5689), v. 68, especial Congreso, junio 2017]
Artículo2017 Radiological, Leaching, and Mechanical Properties of Cocombustion Fly Ash in Cements JOURNAL OF HAZARDOUS TOXIC AND RADIOACTIVE WASTE

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/06/2020 31/05/2024 Investigador/a Diseño de Refuerzo Multiescala para muy Alta Resistencia a Tracción y Fatiga (PID2019-110928RB-C33) Ministerio de Ciencia, Innovación y Universidades (Nacional)
01/02/2020 30/04/2022 Investigador/a Análisis multiescala del comportamiento a altas temperaturas de materiales de base cementante reforzados con grafeno (CemGrapHot) (US-1266248) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
01/02/2020 30/04/2022 Contratado Análisis multiescala del comportamiento a altas temperaturas de materiales de base cementante reforzados con grafeno (CemGrapHot) (US-1266248) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
30/12/2016 31/12/2020 Investigador/a Fractura y Fatiga Termo-Mecánica en Hormigones de Altas Prestaciones Reforzados con Fibras: Análisis del Daño por Choque Térmico (BIA2016-75431-R) Ministerio de Economía y Competitividad (Nacional)
01/01/2016 31/12/2019 Contratado Desarrollo de Herramientas Computacionales para el Diseño de Materiales para Aplicaciones de Almacenamiento Eficiente de Energía (DPI2015-66534-R) Ministerio de Economía y Competitividad (Nacional)
01/01/2014 31/12/2017 Investigador/a Comportamiento en Fractura y Fatiga Termo-Mecánica de Elementos de Hormigón de Alta Resistencia Postensados Sometidos a Ciclos de Tracción- Compresión (BIA2013-48352-P) Ministerio de Economía y Competitividad (Nacional)
01/01/2014 31/12/2017 Contratado Comportamiento en Fractura y Fatiga Termo-Mecánica de Elementos de Hormigón de Alta Resistencia Postensados Sometidos a Ciclos de Tracción- Compresión (BIA2013-48352-P) Ministerio de Economía y Competitividad (Nacional)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
19/02/2024 18/02/2025 Responsable DETERMINACIÓN DE LAS PROPIEDADES RESISTENTES A LA TRACCIÓN Y FLEXIÓN DE POLICARBONATOS ESTRUCTURALES (PI-2456/11/2024) Polímeros Gestión Industrial S.L. (Desconocido)
El investigador no tiene ningún resultado de investigación asociado