Jose Antonio Reinoso Cuevas

Profesor Titular de Universidad
jreinoso@us.es
Área de conocimiento: Mecánica de Medios Continuos y Teoría de Estructuras
Departamento: Mecánica Med.Continuos y Teoría Estruct.
Grupo: ELASTICIDAD Y RESISTENCIA DE MATERIALES (TEP-131)
Tipo Año Título Fuente
Artículo2021 A framework for the analysis of fully coupled normal and tangential contact problems with complex interfaces FINITE ELEMENTS IN ANALYSIS AND DESIGN
Editorial2021 Forewords THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2021 Modelling of residually stressed, extended and inflated cylinders with application to aneurysms MECHANICS RESEARCH COMMUNICATIONS
Artículo2021 Phase field modeling of fracture in Functionally Graded Materials: Γ-convergence and mechanical insight on the effect of grading THIN-WALLED STRUCTURES
Artículo2020 A consistent finite displacement and rotation formulation of the Linear Elastic Brittle Interface Model for triggering interlaminar damage in fiber-reinforced composites THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2020 A multi phase-field fracture model for long fiber reinforced composites based on the Puck theory of failure COMPOSITE STRUCTURES
Artículo2020 A phase field approach enhanced with a cohesive zone model for modeling delamination induced by matrix cracking COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2020 A phase field approach for ductile fracture of short fibre reinforced composites THEORETICAL AND APPLIED FRACTURE MECHANICS
Ponencia2020 A procedure for the estimation of the shape imperfections of a composite panel in order to reproduce its postbuckling evolution ECCM 2018 - 18th European Conference on Composite Materials
Otros2020 A variational approach with embedded roughness for adhesive contact problems Mechanics of Advanced Materials and Structures
Capítulo2020 Computational methods for contact problems with roughness CISM Courses and Lectures
Artículo2020 Crack arrest through branching at curved weak interfaces: An experimental and numerical study THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2020 In-situ strength effects in long fibre reinforced composites: A micro-mechanical analysis using the phase field approach of fracture THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2020 Numerical study of interface cracking in composite structures using a novel geometrically nonlinear Linear Elastic Brittle Interface Model: Mixed-mode fracture conditions and application to structured interfaces COMPOSITE STRUCTURES
Artículo2020 Phase field model for fracture analysis of functionally graded power-based shell structures Mechanics of Advanced Materials and Structures
Artículo2019 A computational model for fiber-reinforced composites: hyperelastic constitutive formulation including residual stresses and damage COMPUTATIONAL MECHANICS
Artículo2019 A general non-local constitutive relation for residually stressed solids MECHANICS RESEARCH COMMUNICATIONS
Artículo2019 A micromechanical analysis of inter-fiber failure in long reinforced composites based on the phase field approach of fracture combined with the cohesive zone model INTERNATIONAL JOURNAL OF FRACTURE
Artículo2019 A phase field approach for damage propagation in periodic microstructured materials INTERNATIONAL JOURNAL OF FRACTURE
Artículo2019 A phase field approach to simulate intralaminar and translaminar fracture in long fiber composite materials COMPOSITE STRUCTURES
Artículo2019 Analysis of 3D Printed Trapezoidal Interfaces by Means of a Novel Cohesive-Based Analytical Approach JOURNAL OF MULTISCALE MODELING
Artículo2019 Bifurcation and post-bifurcation of an inflated and extended residually-stressed circular cylindrical tube with application to aneurysms initiation and propagation in arterial wall tissue FINITE ELEMENTS IN ANALYSIS AND DESIGN
Artículo2019 Constitutive modeling framework for residually stressed viscoelastic solids at finite strains MECHANICS RESEARCH COMMUNICATIONS
Artículo2019 Crack Patterns in Heterogenous Rocks Using a Combined Phase Field-Cohesive Interface Modeling Approach: A Numerical Study ENERGIES
Ponencia2019 Enhancing the fracture toughness of adhesively bonded joints using 3D printed structured interfaces ECCM 2018 - 18th European Conference on Composite Materials
Artículo2019 Finite strain analysis of limestone/basaltic magma interaction and fracture: Low order mixed tetrahedron and remeshing EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
Artículo2019 Fracture analysis of thin films on compliant substrates: A numerical study using the phase field approach of fracture International Journal of Pressure Vessels and Piping
Artículo2019 Fracture energy characterisation of a structured interface by means of a novel J-Integral procedure JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
Artículo2019 On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2019 Surface-based and solid shell formulations of the 7-parameter shell model for layered CFRP and functionally graded power-based composite structures Mechanics of Advanced Materials and Structures
Artículo2019 The steady-state Archard adhesive wear problem revisited based on the phase field approach to fracture INTERNATIONAL JOURNAL OF FRACTURE
Artículo2018 A three dimensional adaptive multiscale method for crack growth in Silicon THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2018 Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation ENGINEERING FRACTURE MECHANICS
Artículo2018 Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field-cohesive zone model approach COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2018 Fracture resistance of 3D printed adhesively bonded DCB composite specimens using structured interfaces: Experimental and theoretical study COMPOSITE STRUCTURES
Artículo2018 General constitutive updating for finite strain formulations based on assumed strains and the Jacobian FINITE ELEMENTS IN ANALYSIS AND DESIGN
Artículo2018 Influencia de las interfases estructuradas en la tenacidad a la fractura de uniones adhesivas en especímenes DCB fabricados mediante impresión 3D: estudio experimental y analítico Anales de Mecánica de la Fractura
Ponencia2018 Invariant-Based Finite Strain Anisotropic Material Model for Fiber-Reinforced Composites Lecture Notes in Applied and Computational Mechanics
Artículo2018 Mixed-mode failure of interfaces studied by the 2D linear elastic-brittle interface model: Macro- and micro-mechanical finite-element applications in composites JOURNAL OF ADHESION
Artículo2018 Modeling complex crack paths in ceramic laminates: A novel variational framework combining the phase field method of fracture and the cohesive zone model JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2018 Peeling of thick adhesive interfaces: The role of dynamics and geometrical nonlinearity MECHANICS RESEARCH COMMUNICATIONS
Revisión2018 Recent advancements on the phase field approach to brittle fracture for heterogeneous materials and structures Advanced Modeling and Simulation in Engineering Sciences
Otros2018 Simulation of the Mechanical Response of Thin-Ply Composites: From Computational Micro-Mechanics to Structural Analysis ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
Ponencia2018 Snap-Through of Bistable Configurations Generated from Variable Stiffness Composites Lecture Notes in Applied and Computational Mechanics
Artículo2018 Thermally induced multistable configurations of variable stiffness composite plates: Semi-analytical and finite element investigation COMPOSITE STRUCTURES
Artículo2017 A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model COMPOSITE STRUCTURES
Artículo2017 A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2017 A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects COMPOSITES PART B-ENGINEERING
Artículo2017 A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates COMPOSITES PART B-ENGINEERING
Ponencia2017 A phase field method based three dimensional global-local modelling framework for fracture in rocks ICF 2017 - 14th International Conference on Fracture
Artículo2017 A thermodynamically consistent framework to couple damage and plasticity microplane-based formulations for fracture modeling: development and algorithmic treatment INTERNATIONAL JOURNAL OF FRACTURE
Ponencia2017 Complex crack paths in layered composite materials: Interaction between phase field and interfaces ICF 2017 - 14th International Conference on Fracture
Artículo2017 Concurrently coupled solid shell-based adaptive multiscale method for fracture COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2017 Ensayos de pull-off sobre probetas con rigidizadores en T Materiales Compuestos
Artículo2017 Estudio experimental de interfases no convencionales con patrones trapezoidales Materiales Compuestos
Artículo2017 Experimental failure investigation of pull-off tests of single T-stiffened composite specimens COMPOSITE STRUCTURES
Artículo2017 Finite-strain low order shell using least-squares strains and two-parameter thickness extensibility EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
Artículo2017 Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation COMPUTATIONAL MECHANICS
Ponencia2017 Phase field modeling of brittle fracture for solid shells at large deformations ICF 2017 - 14th International Conference on Fracture
Artículo2017 Revisiting the problem of a crack impinging on an interface: A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2017 Strength prediction of notched thin ply laminates using finite fracture mechanics and the phase field approach COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2016 A computational framework for the interplay between delamination and wrinkling in functionally graded thermal barrier coatings COMPUTATIONAL MATERIALS SCIENCE
Artículo2016 A finite element framework for the interplay between delamination and buckling of rubber-like bi-material systems and stretchable electronics JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Ponencia2016 A finite thickness interface element for composite delamination ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
Artículo2016 A two-way loose coupling procedure for investigating the buckling and damage behaviour of stiffened composite panels COMPOSITE STRUCTURES
Artículo2016 Adhesive behaviour of bonded paper layers: Mechanical testing and statistical modelling PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
Artículo2016 An invariant-based anisotropic material model for short fiber-reinforced thermoplastics: Coupled thermo-plastic formulation COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
Artículo2016 Analysis of noise-induced temporal correlations in neuronal spike sequences EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS
Artículo2016 Application and finite element implementation of 7-parameter shell element for geometrically nonlinear analysis of layered CFRP composites COMPOSITE STRUCTURES
Ponencia2016 Damage simulations in a composite Ω-stiffened panel in postbuckling regime ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
Capítulo2016 Damage simulations in composite structures in the presence of stress gradients Modeling Damage, Fatigue and Failure of Composite Materials
Artículo2016 Damage tolerance of composite runout panels under tensile loading COMPOSITES PART B-ENGINEERING
Artículo2016 Emergence of spike correlations in periodically forced excitable systems PHYSICAL REVIEW E
Artículo2016 Finite deformation model for short fiber reinforced composites: Application to hybrid metal-composite clinching joints COMPOSITE STRUCTURES
Artículo2016 Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell element COMPOSITE STRUCTURES
Artículo2016 Modelo de interfase elastica lineal fragil (MIELF) aplicado a problemas tridimensionales con crecimiento de grietas en modo mixto Anales de Mecánica de la Fractura
Artículo2015 A constitutive-based element-by-element crack propagation algorithm with local mesh refinement COMPUTATIONAL MECHANICS
Artículo2015 An anisotropic large displacement cohesive zone model for fibrillar and crazing interfaces INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Ponencia2015 An invariant-based anisotropic thermo-plastic material model for short fiber reinforced thermoplastics ICCM International Conferences on Composite Materials
Artículo2015 Spatial spread of the Hantavirus infection PHYSICAL REVIEW E
Artículo2014 A consistent interface element formulation for geometrical and material nonlinearities COMPUTATIONAL MECHANICS
Ponencia2014 Composite plates modeling strategies for the estimation of transverse stresses 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Failure analysis of a CFRP run-out configuration with butt-strap joint 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Failure analysis of skin-stringer interfaces 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Material characterization for FEA of the clinching process of short fiber reinforced thermoplastics with an aluminum sheet Advanced Materials Research
Ponencia2014 Material modelling of short fiber reinforced thermoplastic for the FEA of a clinching test Procedia CIRP
Ponencia2014 Origin, control, and predictability of optical rogue waves in semiconductor lasers Nonlinear Photonics, NP 2014
Ponencia2014 Predictability of optical roguewaves in optically injected semiconductor lasers Optics InfoBase Conference Papers
Artículo2013 A composite runout specimen subjected to tension-compression loading conditions: Experimental and global-local finite element analysis COMPOSITE STRUCTURES
Artículo2013 Extreme intensity pulses in a semiconductor laser with a short external cavity Physical Review E: Statistical, Nonlinear, and Soft Matter Physics
Ponencia2013 Postbuckling analysis of a composite cylindrical panel with frames and omega stringers ICCM International Conferences on Composite Materials
Artículo2013 Stage-dependent model for Hantavirus infection: The effect of the initial infection-free period PHYSICAL REVIEW E
Ponencia2012 Analysis of a stringer run-out concept including damage initiation and evolution at the interfaces ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Artículo2012 Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces COMPOSITES PART B-ENGINEERING
Ponencia2012 On the use of three dimensional material laws in the analyses of Functionally Graded shells ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Artículo2012 Postbuckling behavior of a pressurized stiffened composite panel - Part II: Numerical analysis. Effect of the geometrical imperfections COMPOSITE STRUCTURES
Artículo2012 Postbuckling behaviour of a pressurized stiffened composite panel - Part I: Experimental study COMPOSITE STRUCTURES

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/01/2016 31/12/2018 Investigador/a Desarrollo de un Procedimiento de Dimensionamiento por Unfolding en Materiales Compuestos (MAT2015-71309-P) Ministerio de Economía y Competitividad (Nacional)
01/01/2016 31/12/2018 Investigador/a Nuevos Enfoques de la Mecánica de la Fractura Computacional para la Caracterización de Inicio y Crecimiento de Grietas en Materiales Compuestos en Diferentes Escalas (MAT2015-71036-P) Ministerio de Economía y Competitividad (Nacional)
01/03/2018 31/12/2021 Investigador/a Methodology Development and Validation of WEight Optimized Stiffeners Run-Out Design for Future Composite Wings - DOVER (SI-1782/13/2018) Comisión Europea (Europeo)
12/04/2007 30/10/2010 Investigador/a Desarrollo de modelos cohesivos y de mecánica de la fractura para el estudio de uniones cocuradas y copegadas de materiales compuestos (P06-TEP-02045) Junta de Andalucía (Plan Andaluz de Investigación) (Autonómico)
01/02/2020 31/01/2022 Responsable Interfases estructuradas en estructuras de materiales compuestos (IntEstComp) (US-1265577) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
26/03/2013 25/03/2017 Investigador/a Análisis del Comportamiento de Paneles Rigidizados de Material Compuesto en Régimen de Postpandeo (P11-TEP-7093) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)
01/05/2020 30/04/2024 Investigador/a New strategies for multifield fracture problems across scales in heterogeneous systems for Energy, Health and Transport -NEWFRAC (H2020-861061) Comisión Europea (Europeo)
01/01/2013 31/12/2015 Investigador/a Elementos Laminares Avanzados para Análisis no Lineales de Paneles de Material Compuesto (DPI2012-37187) Ministerio de Economía y Competitividad (Nacional)
01/06/2020 31/05/2023 Responsable Caracterización de Procesos de Fractura en Margas: Experimentación y Modelización Mediante Modelos Variacionales Hidro-Mecánicos en Materiales Porosos Parcialmente Saturados (PID2019-109723GB-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional)
30/01/2014 29/01/2018 Investigador/a Estudio del Comportamiento de Laminados Gruesos de Material Compuesto Sometidos a Cargas de Compresión. (P12-TEP-1050) Consejería de Economía, Innovación y Ciencia (Autonómico)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/05/2012 31/12/2014 Investigador/a ECLIPSE: Estructuras en Composites y materiales LIgeros para Procesos de Sencillo Ensamblaje Proyecto Convocatoria INNTERCONECTA (PI-0978/2012) EADS - Construcciones Aeronáuticas, S.A. (Nacional)
09/04/2018 08/04/2019 Responsable Cálculo Estructural Rack 02 Instalación 02 EC 145 (3434/0955) AYESA AIR CONTROL, S.L. (Local)