Francisco Perdigones Sánchez

Profesor Titular de Universidad
fperdigones@us.es
Área de conocimiento: Tecnología Electrónica
Departamento: Ingeniería Electrónica
Grupo: TECNOLOGIA ELECTRONICA (TIC-109)
Prog. doctorado: Prog.de Doct. en Ingeniería Automática, Electrónica y de Telecomunicación
Tipo Año Título Fuente
Artículo2021 Lab-on-PCB and flow driving: a critical review MICROMACHINES
Artículo2021 Low cost SU-8 lift-off process to fabricate a gold/glass microelectrodes array for culturing applications MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
Artículo2021 Semi-automatic lab-on-PCB system for agarose gel preparation and electrophoresis for biomedical applications MICROMACHINES
Ponencia2021 Towards a 3D-printed and autonomous culture platform integrated with commercial microelectrode arrays Proceedings of the 2021 13th Spanish Conference on Electron Devices, CDE 2021
Artículo2019 Electrostimulation in an autonomous culture lab-on-chip provides neuroprotection of a retinal explant from a retinitis pigmentosa mouse-model SENSORS AND ACTUATORS B-CHEMICAL
Artículo2019 Highly integrable and normally open microvalve for industrial thermoplastic-based lab on PCB SENSORS AND ACTUATORS A-PHYSICAL
Artículo2019 Single-use impulsion system for displacement of liquids on thermoplastic-based lab on chip SENSORS AND ACTUATORS A-PHYSICAL
Artículo2018 Bonding process using integrated electrothermal actuators for microfluidic circuit fabrication JOURNAL OF MICROMECHANICS AND MICROENGINEERING
Artículo2018 Fabrication method of lab-on-PCB devices using a microheater with a thermo-mechanical barrier MICROELECTRONIC ENGINEERING
Artículo2018 Gold microelectrodes array embedded in PDMS for electrical stimulation and signal detection SENSORS AND ACTUATORS B-CHEMICAL
Artículo2018 Highly Integrable Microfluidic Impulsion System for Precise Displacement of Liquids on Lab on PCBs JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
Ponencia2018 Lab-on-PCB: low cost 3D Microelectrode array device for extracellular recordings PROCEEDINGS OF THE 2018 12TH SPANISH CONFERENCE ON ELECTRON DEVICES (CDE)
Artículo2018 Lab-protocol-on-PCB: Prototype of a laboratory protocol on printed circuit board using MEMS technologies MICROELECTRONIC ENGINEERING
Capítulo2018 Microfabrication technologies used for creating smart devices for industrial applications SMART SENSORS AND MEMS: INTELLIGENT SENSING DEVICES AND MICROSYSTEMS FOR INDUSTRIAL APPLICATIONS, 2ND EDITION
Ponencia2017 Conditioning Lab on PCB to Control Temperature and Mix Fluids at the Microscale for Biomedical Applications 2017 SPANISH CONFERENCE ON ELECTRON DEVICES (CDE)
Ponencia2017 Dynamic Study of the Gate of an n-MOS Microfluidic Transistor for Computational Microfluidics 2017 SPANISH CONFERENCE ON ELECTRON DEVICES (CDE)
Artículo2017 Fabrication process for inexpensive, biocompatible and transparent PCBs. Application to a flow meter MICROELECTRONIC ENGINEERING
Artículo2016 Fabrication Process for PCBMEMS Capacitive Pressure Sensors Using the Cu Layer to Define the Gap IEEE SENSORS JOURNAL
Artículo2015 Integration method of silicon sensors on SU-8-based microfluidic platforms MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
Ponencia2015 Microfluidic Platform with Absorbance Sensor for Glucose Detection PROCEEDINGS OF THE 2015 10TH SPANISH CONFERENCE ON ELECTRON DEVICES (CDE)
Artículo2015 Portable Lab-on-PCB platform for autonomous micromixing MICROELECTRONIC ENGINEERING
Artículo2015 Pressurization method for controllable impulsion of liquids in microfluidic platforms MICROELECTRONIC ENGINEERING
Artículo2014 Correspondence Between Electronics and Fluids in MEMS Designing Microfluidic Systems Using Electronics IEEE INDUSTRIAL ELECTRONICS MAGAZINE
Artículo2014 Depressurised reservoirs for portable fluid extraction in SU-8-based microfluidic systems MICRO & NANO LETTERS
Artículo2014 Fabrication process for integration of SU-8 check valves on printed circuit board- based microfluidic platforms MICRO & NANO LETTERS
Artículo2014 Highly Integrable Pressurized Microvalve for Portable SU-8 Microfluidic Platforms JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
Artículo2014 Low consumption single-use microvalve for microfluidic PCB-based platforms JOURNAL OF MICROMECHANICS AND MICROENGINEERING
Capítulo2014 Microfabrication technologies used for creating smart devices for industrial applications SMART SENSORS AND MEMS: INTELLIGENT DEVICES AND MICROSYSTEMS FOR INDUSTRIAL APPLICATIONS
Ponencia2014 Microfluidic circuit for flow rate auto-regulation IECON 2014 - 40TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY
Artículo2013 Analysis and design process of a bi-membrane structure for micro-flow regulators MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
Ponencia2013 Electroosmotic Impulsion Device for Integration in PCB-MEMS PROCEEDINGS OF THE 2013 SPANISH CONFERENCE ON ELECTRON DEVICES (CDE 2013)
Ponencia2013 Microfluidic Impulsion System Manufactured by PCB-MEMS for Lab on a Chip PROCEEDINGS OF THE 2013 SPANISH CONFERENCE ON ELECTRON DEVICES (CDE 2013)
Ponencia2013 Pressurized Microvalve with SMD-Based Activation to Drive Fluid in Low-Cost and Autonomous MEMS PROCEEDINGS OF THE 2013 SPANISH CONFERENCE ON ELECTRON DEVICES (CDE 2013)
Ponencia2013 Sensor structures generated with combination of SU8 and PCBMEMS 39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013)
Artículo2013 Single axis accelerometer fabricated using printed circuit board techniques and laser ablation SENSORS AND ACTUATORS A-PHYSICAL
Artículo2012 Bonding, exposing and transferring technique in SU-8 and SU-8 laser micromachining combination for 3D, free-standing and multilevel microstructures MICRO & NANO LETTERS
Artículo2012 Capacitive depression sensor for microfluidic pneumatic networks SENSORS AND ACTUATORS A-PHYSICAL
Ponencia2012 Fabrication of electroosmotic micropump using PCB and SU-8 38TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2012)
Ponencia2011 Capacitive pressure sensor fabricated using printed circuit board techniques Proceedings of the 8th Spanish Conference on Electron Devices, CDE'2011
Ponencia2011 Combination of PCBMEMS and Laser Ablation to Construct Inexpensive Accelerometers IECON 2011: 37TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY
Ponencia2011 Fabrication process of a SU-8 monolithic pressurized microchamber for pressure driven microfluidic applications Proceedings of the 8th Spanish Conference on Electron Devices, CDE'2011
Artículo2011 Highly Integrable Flow Regulator With Positive Gain JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
Capítulo2011 Microsystem Technologies for Biomedical Applications BIOMEDICAL ENGINEERING TRENDS IN ELECTRONICS, COMMUNICATIONS AND SOFTWARE
Ponencia2011 Pneumatic free piston fabricated in SU-8 for MEMS applications Proceedings of the 8th Spanish Conference on Electron Devices, CDE'2011
Artículo2011 Pneumatically actuated positive gain microvalve with n-channel metal-oxide semiconductor-like behaviour MICRO & NANO LETTERS
Ponencia2011 Towards a low-cost production of monodispersed microbubbles using PCB-MEMS technology Proceedings of the 8th Spanish Conference on Electron Devices, CDE'2011
Artículo2010 BETTS: bonding, exposing and transferring technique in SU-8 for microsystems fabrication JOURNAL OF MICROMECHANICS AND MICROENGINEERING
Artículo2010 Characterisation of the fabrication process of freestanding SU-8 microstructures integrated in printing circuit board in microelectromechanical systems MICRO & NANO LETTERS
Artículo2010 Integration of polydimethylsiloxane membranes in SU-8 structures MICRO & NANO LETTERS
Artículo2010 Novel Structure for a Pneumatically Controlled Flow Regulator With Positive Gain JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
Artículo2010 PDMS microdevice for precise liquid aspiration in the submicroliter range based on the Venturi effect MICROELECTRONIC ENGINEERING
Artículo2010 Pneumatic impulsion device for microfluidic systems SENSORS AND ACTUATORS A-PHYSICAL
Ponencia2010 Safety valve in PCB-MEMS technology for limiting pressure in microfluidic applications Proceedings of the IEEE International Conference on Industrial Technology
Ponencia2009 Liquid Aspiration Device Based on Venturi Effect Built on PDMS PROCEEDINGS OF THE 2009 SPANISH CONFERENCE ON ELECTRON DEVICES
Artículo2009 Reduction of droplet-size dispersion in parallel flow-focusing microdevices using a passive method JOURNAL OF MICROMECHANICS AND MICROENGINEERING
Artículo2007 Silicon microdevice for emulsion production using three-dimensional flow focusing JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
Ponencia2007 Stability analysis and fabrication process of a multiple flow focusing microdevice built in SU-8 2007 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, PROCEEDINGS, VOLS 1-8
Ponencia2007 Towards a microsytem of multiple production of micro-drops manufactured on silicon 2007 SPANISH CONFERENCE ON ELECTRON DEVICES, PROCEEDINGS

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/01/2015 30/06/2018 Investigador/a Desarrollo y Validación de una Plataforma Lab-on-Chip para Aplicaciones Biomédicas sobre Sustrato Pcb (Lab-on-Pcb) (TEC2014-54449-C3-2-R) Ministerio de Economía y Competitividad (Nacional)
12/11/2020 12/06/2021 Investigador/a Diseño, fabricación y validación de un test rápido basado en Lab-on-Chip con PCR y detección por fluorescencia de carga vírica SARS-CoV-2 (COVIDETECT) (CV20-98629) Consejería de Economía, Conocimiento, Empresas y Universidad (Autonómico)
01/10/2007 30/09/2010 Investigador/a Estudio y desarrollo de aplicaciones, métodos, física y diseño de dispositivos para la generación de chorros capilares y producción de partículas, aerosoles y espumas micro y nanométricos (DPI2007-63559) Ministerio de Educación y Ciencia (Nacional)
01/01/2012 31/03/2015 Investigador/a Integración de Sensores Inteligentes en Lab-on-Chip para Aplicaciones Biomédicas (TEC2011-29045-C04-02) Ministerio de Ciencia e Innovación (Nacional)
30/01/2014 16/07/2019 Investigador/a Microlab-en-Chip para Producción de Radiofármacos para Diagnóstico PET (P12-TIC-2296) Consejería de Economía, Innovación y Ciencia (Autonómico)
01/01/2020 31/12/2022 Responsable Sistema para la amplificación y detección de fragmentos de ADN empleando PCR en Lab-on-chip (PCR-on-a-Chip) (P18-RT-1745) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
13/12/2004 30/10/2008 Investigador/a Desarrollo e integración de microsistemas (MEMS) microfluidicos para producción de micro- y nano- partículas simples y complejas usando flow focusing y electro-flow-focusing (DPI2004-07197) Ministerio de Ciencia y Tecnología (Nacional)
13/01/2009 13/01/2012 Investigador/a Mezclado Ultrafino de Fases Inmiscibles y Atomización Turbulenta: Modelización y Generación de Poblaciones Submicrométricas y Nanométricas (P08-TEP-04128) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)
05/05/2011 28/02/2014 Investigador/a SIGMAPLANTAS: La innovación en las plantas y modelos de sistemas de concentración fotovoltaica en España (IPT-2011-1468-920000) Ministerio de Ciencia e Innovación (Nacional)
01/02/2020 31/01/2022 Investigador/a Lab-on-chip de electro-estimulación, para el estudio In-vitro de Cultivos de retina de Larga duración: Retina-on-a-chip (US-1265983) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
13/01/2009 13/01/2012 Investigador/a Sensor Solar Altamente Integrado para el Control de Actitud de Satélites (P08-TIC-03590) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)
01/01/2019 31/12/2021 Investigador/a Integración de Opto-Electroestimulación y Procesamiento de Señales para el Estudio in-Vitro de Larga Duración del Comportamiento Neuronal (RTI2018-100773-B-C33) Ministerio de Ciencia, Innovación y Universidades (Nacional)
01/01/2008 31/12/2008 Investigador/a MEMSFAB2 (SN-0668/2008) Ministerio de Industria, Turismo y Comercio (Nacional)
26/03/2013 25/09/2016 Investigador/a Desarrollo de un Star Tracker con Componentes Cots para el Control de Actitud de Picosatélites (P11-TIC-7351) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/01/2008 31/12/2009 Investigador/a Bioingeniería al servicio de la Sociedad. SINBAD (SN-0388/2008) Ministerio de Educación y Ciencia (Nacional)