Vladislav Mantic Lescisin

Catedrático de Universidad
mantic@us.es
Área de conocimiento: Mecánica de Medios Continuos y Teoría de Estructuras
Departamento: Mecánica Med.Continuos y Teoría Estruct.
Grupo: ELASTICIDAD Y RESISTENCIA DE MATERIALES (TEP-131)
Prog. doctorado: Prog.de Doct.en Ingeniería Mecánica y de Organización Industrial (99/2011)
Tipo Año Título Fuente
Artículo2021 Crack onset in stretched open hole PMMA plates considering linear and non-linear elastic behaviours THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2021 The use of the Gurtin-Murdoch theory for modeling mechanical processes in composites with two-dimensional reinforcements COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2020 A numerical implementation of the Coupled Criterion of Finite Fracture Mechanics for elastic interfaces THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2020 Analysis of the Antiplane Problem with an Embedded Zero Thickness Layer Described by the Gurtin-Murdoch Model Journal of Elasticity
Artículo2020 Crack arrest through branching at curved weak interfaces: An experimental and numerical study THEORETICAL AND APPLIED FRACTURE MECHANICS
Ponencia2020 Micro damage and cracking in fibre reinforced composites by a novel hybrid numerical technique AIP Conference Proceedings
Artículo2020 Premature failures in standard test specimens with composite materials induced by stress singularities in adhesive joints INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
Artículo2020 Singular elastic solutions in corners with spring boundary conditions under anti-plane shear INTERNATIONAL JOURNAL OF FRACTURE
Artículo2019 Accurate modelling of instabilities caused by multi-site interface-crack onset and propagation in composites using the sequentially linear analysis and Abaqus COMPOSITE STRUCTURES
Artículo2019 An experimental study of the translaminar fracture toughnesses in composites for different crack growth directions, parallel and transverse to the fiber direction COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2019 Experimental study of the size effect on transverse cracking in cross-ply laminates and comparison with the main theoretical models MECHANICS OF MATERIALS
Artículo2019 Interface crack model using finite fracture mechanics applied to the double pull-push shear test INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2019 On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2018 Boundary integral formulation of frictionless contact problems based on an energetic approach and its numerical implementation by the collocation BEM Frontiers in Built Environment
Ponencia2018 Convergence of the BEM solution applied to the CCFFM for LEBIM Key Engineering Materials
Artículo2018 Coupled stress and energy criterion for multiple matrix cracking in cross-ply composite laminates INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2018 El ángulo crítico de entallas en forma de v en los ensayos de flexión en tres puntos Anales de Mecánica de la Fractura
Artículo2018 Mixed-mode failure of interfaces studied by the 2D linear elastic-brittle interface model: Macro- and micro-mechanical finite-element applications in composites JOURNAL OF ADHESION
Artículo2018 The effect of residual thermal stresses on transverse cracking in cross-ply laminates: an application of the coupled criterion of the finite fracture mechanics INTERNATIONAL JOURNAL OF FRACTURE
Artículo2018 Two adhesive-contact models for quasistatic mixed-mode delamination problems MATHEMATICS AND COMPUTERS IN SIMULATION
Artículo2017 AN ENERGY BASED FORMULATION OF A QUASI-STATIC INTERFACE DAMAGE MODEL WITH A MULTILINEAR COHESIVE LAW DISCRETE AND CONTINUOUS DYNAMICAL SYSTEMS-SERIES S
Artículo2017 Crack paths formed by multiple debonds in LFRP composites MECHANICS RESEARCH COMMUNICATIONS
Ponencia2017 Double pull-push shear test by finite fracture mechanics and linear elastic interfaces ICF 2017 - 14th International Conference on Fracture
Ponencia2017 Effect of residual thermal stresses in the coupled criterion. An application to transverse cracking in cross-ply laminates ICF 2017 - 14th International Conference on Fracture
Artículo2017 Eliminación de singularidades en ensayos estándar de materiales compuestos Materiales Compuestos
Artículo2017 Galerkin boundary integral formulation for axisymmetric stokes flow ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Ponencia2017 Implementation of the finite fracture mechanics criterion at elastic interfaces in the FEM package abaqus ICF 2017 - 14th International Conference on Fracture
Ponencia2017 Interface crack growth in composite materials by finite fracture mechanics at elastic interfaces for displacement and load control ICF 2017 - 14th International Conference on Fracture
Capítulo2017 Micromechanics of interfacial damage in composites Comprehensive Composite Materials II
Artículo2017 Mode-I debonding of a double cantilever beam: A comparison between cohesive crack modeling and Finite Fracture Mechanics INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2017 Quasistatic normal-compliance contact problem of visco-elastic bodies with Coulomb friction implemented by QP and SGBEM JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS
Artículo2017 Symmetrical or Non-Symmetrical Debonds at Fiber-Matrix Interfaces: A Study by BEM and Finite Fracture Mechanics on Elastic Interfaces JOURNAL OF MULTISCALE MODELING
Ponencia2017 T-stress effects on the crack curvature ICF 2017 - 14th International Conference on Fracture
Artículo2016 A numerical study of transverse cracking in cross-ply laminates by 3D finite fracture mechanics COMPOSITES PART B-ENGINEERING
Ponencia2016 Crack deflection in brittle materials by Finite Fracture Mechanics Procedia Structural Integrity
Artículo2016 Crack onset and propagation at fibre-matrix elastic interfaces under biaxial loading using finite fracture mechanics COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
Ponencia2016 Evolution of crack density in cross-ply laminates. Application of a coupled stress and energy criterion Key Engineering Materials
Capítulo2016 Failure models for composite joints: An approach based on singular stress states Modeling Damage, Fatigue and Failure of Composite Materials
Capítulo2016 Fiber-matrix debonding in composite materials: Axial loading Modeling Damage, Fatigue and Failure of Composite Materials
Capítulo2016 Fiber-matrix debonding in composite materials: Transverse loading Modeling Damage, Fatigue and Failure of Composite Materials
Artículo2016 Finite Fracture Mechanics: a deeper investigation on negative T-stress effects INTERNATIONAL JOURNAL OF FRACTURE
Ponencia2016 Influence of a neighbour fibre on the onset and growth of a fibre-matrix debond under biaxial loading. A study by Finite Fracture Mechanics at linear elastic interfaces. Procedia Structural Integrity
Editorial2016 International conference on boundary element and meshless techniques XVI PREFACE EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS
Ponencia2016 LEBIM predictions for fibre-matrix debonds in unidirectional fibre-reinforced composites under biaxial transverse loads ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
Capítulo2016 Micromechanical evidences on interfibre failure of composites The Structural Integrity of Carbon Fiber Composites: Fifty Years of Progress and Achievement of the Science, Development, and Applications
Artículo2016 Modelling interfacial debonds in unidirectional fibre-reinforced composites under biaxial transverse loads COMPOSITE STRUCTURES
Artículo2016 Modelo de interfase elastica lineal fragil (MIELF) aplicado a problemas tridimensionales con crecimiento de grietas en modo mixto Anales de Mecánica de la Fractura
Artículo2016 Numerical solution of frictional contact problems for viscoelastic solids by SGBEM and quadratic programming Key Engineering Materials
Ponencia2016 Revisiting the problem of debond initiation at fibre-matrix interface under transversal biaxial loads. A comparison of several non-classical fracture mechanics approaches Key Engineering Materials
Artículo2016 T-stress effects on crack deflection: Straight vs. curved crack advance EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
Artículo2016 Tensile and shear strength of bimaterial interfaces within composite materials COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2015 A linear elastic-brittle interface model: application for the onset and propagation of a fibre-matrix interface crack under biaxial transverse loads INTERNATIONAL JOURNAL OF FRACTURE
Artículo2015 A model for the prediction of debond onset in spherical-particle-reinforced composites under tension. Application of a coupled stress and energy criterion COMPOSITES SCIENCE AND TECHNOLOGY
Ponencia2015 Crack onset in a polymer matrix with open-hole configuration and viscoelastic behavior. Application of the finite fracture mechanics coupled criterion ICCM International Conferences on Composite Materials
Artículo2015 Debonding at the fibre-matrix interface under remote transverse tension. One debond or two symmetric debonds? EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
Artículo2015 Failure initiation criterion in bonded joints with composites based on singularity parameters and practical procedure for design purposes COMPOSITE INTERFACES
Ponencia2015 Normal and shear strength of bimaterial joints using modified geometries of the tensile and iosipescu specimens ICCM International Conferences on Composite Materials
Ponencia2014 A practical approach to use singular stress states in the design of composite adhesive joints 16th European Conference on Composite Materials, ECCM 2014
Artículo2014 A simple and efficient BEM implementation of quasistatic linear visco-elasticity INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Ponencia2014 Application of finite fracture mechanics to composites: Crack onset in a stretched open hole polymer plate with nonlinear behaviour 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 BEM implementation of a quasistatic and rate-independent non-associative model of mixed-mode interface-crack growth Procedia Materials Science
Ponencia2014 Comparison of the size effect predicted by a cohesive zone model and the finite fracture mechanics for the fiber-matrix debonding 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Crack onset and propagation along fibre-matrix elastic interfaces under biaxial loading using finite fracture mechanics 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Crack onset and propagation in composite materials using Finite Fracture Mechanics on elastic interfaces Procedia Materials Science
Ponencia2014 Crack onset at the spherical-inclusion matrix interface. Application of a coupled stress and energy criterion Procedia Materials Science
Artículo2014 Effect of a secondary transverse load on the inter-fibre failure under compression COMPOSITES PART B-ENGINEERING
Artículo2014 Effect of Friction on the Size of the Near-tip Contact Zone in a Penny-shaped Interface Crack WEAR AND CONTACT MECHANICS
Artículo2014 Energetic versus maximally-dissipative local solutions of a quasi-static rate-independent mixed-mode delamination model MECCANICA
Ponencia2014 Experimental comparison between the transverse fracture toughness of a unidirectional laminate corresponding to either longitudinal or transverse crack growth 16th European Conference on Composite Materials, ECCM 2014
Artículo2014 Fatigue crack initiation and damage characterization in Brazilian test specimens for adhesive joints JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
Artículo2014 Fiber-size effects on the onset of fiber-matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models ENGINEERING FRACTURE MECHANICS
Ponencia2014 Instability analysis of the fibre-matrix debond onset and growth under transverse tension 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Inter-fibre failure under compression: Biaxial loding 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Modelling of debond onset and growth in a group of fibres under transverse loads using Abaqus user subroutine UMAT 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Prediction of initiation and growth of cracks in composites. Coupled stress and energy criterion of the finite fracture mechanics 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Size and geometry effects on the open-hole strength of composite laminate specimens. Finite fracture mechanics predictions and test results 16th European Conference on Composite Materials, ECCM 2014
Artículo2014 Transverse crack onset and growth in cross-ply [0/90](s) laminates under tension. Application of a coupled stress and energy criterion INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2013 A QUASISTATIC MIXED-MODE DELAMINATION MODEL DISCRETE AND CONTINUOUS DYNAMICAL SYSTEMS-SERIES S
Artículo2013 BEM solution of delamination problems using an interface damage and plasticity model COMPUTATIONAL MECHANICS
Ponencia2013 Cohesive-zone-model formulation and implementation using the symmetric Galerkin boundary element method for homogeneous solids COMPUTATIONAL MECHANICS
Artículo2013 Effect of the presence of a secondary transverse load on the inter-fibre failure under tension ENGINEERING FRACTURE MECHANICS
Artículo2013 Modelado de grietas de interfase en un composite con un grupo de fibras sometido a cargas transversales biaxiales Anales de Mecánica de la Fractura
Artículo2013 Quasistatic adhesive contact of visco-elastic bodies and its numerical treatment for very small viscosity ZAMM-Zeitschrift fur Angewandte Mathematik und Mechanik
Artículo2012 A Galerkin projection technique for the evaluation of potential derivatives on a smooth boundary in 2D BEM ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2012 A least squares procedure for the evaluation of multiple generalized stress intensity factors at 2D multimaterial corners by BEM ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2012 Crack onset and growth at the fibre-matrix interface under a remote biaxial transverse load. Application of a coupled stress and energy criterion INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2012 Determination of Generalized Fracture Toughness in composite multimaterial closed corners with two singular terms - Part I: Test proposal and numerical analysis ENGINEERING FRACTURE MECHANICS
Artículo2012 Determination of Generalized Fracture Toughness in composite multimaterial closed corners with two singular terms - Part II: Experimental results ENGINEERING FRACTURE MECHANICS
Artículo2012 Effect of thermal residual stresses on the matrix failure under transverse compression at micromechanical level - A numerical and experimental study COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
Artículo2012 Estudio de grietas transversales y de delaminación en laminados simétricos [0/90] de material compuesto usando la formulación de interfase elástica lineal-frágil Anales de Mecánica de la Fractura
Artículo2012 Finite Fracture Mechanics at elastic interfaces INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Ponencia2012 Numerical and experimental analysis of the influence of thermal residual stresses on matrix failure ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Artículo2012 Recent developments in the evaluation of the 3D fundamental solution and its derivatives for transversely isotropic elastic materials Electronic Journal of Boundary Elements
Ponencia2012 Size effect on transverse crack initiation in cross-ply laminates. Application of a coupled stress and energy criterion ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Ponencia2012 Study of transverse and delamination cracks in [0/90] symmetric laminates by means of the classical LEFM and the linear elastic brittle interface formulation ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Ponencia2012 The effect of transverse load biaxiality on the fibre-matrix debond initiation in FRC. Application of a coupled stress and energy criterion at the micromechanical level ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Artículo2012 Unique real-variable expressions of the integral kernels in the Somigliana stress identity covering all transversely isotropic elastic materials for 3D BEM COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2011 BEM analysis of crack onset and propagation along fiber-matrix interface under transverse tension using a linear elastic-brittle interface model ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2011 BEM analysis of inter-fibre failure under compression in composites: comparison between carbon and glass fibre systems PLASTICS RUBBER AND COMPOSITES
Artículo2011 Caracterización del inicio y crecimiento de grietas de interfaz entre fibra y matriz bajo cargas transversales biaxiales usando el modelo de interfaz elástica lineal-frágil Anales de Mecánica de la Fractura
Artículo2011 Effect of thermal residual stresses on matrix failure under transverse tension at micromechanical level: A numerical and experimental analysis COMPOSITES SCIENCE AND TECHNOLOGY
Ponencia2011 Evaluation of interfacial fracture toughness and friction coefficient in the single fiber fragmentation test Procedia Engineering
Ponencia2011 INFLUENCE OF TRANSVERSE PROPERTIES IN THE MODELING OF DEBOND PROPAGATION IN SINGLE CARBON FIBER COMPOSITES COMPOSITE MATERIALS FOR STRUCTURAL PERFORMANCE: TOWARDS HIGHER LIMITS
Ponencia2011 Iniciación del despegue en la interfase fibra matriz bajo una tensión biaxial. Aplicación de un criterio acoplado tensional y energético Anales de Mecánica de la Fractura
Ponencia2011 Numerical study of the inter-fibre failure under biaxial loads Procedia Engineering
Artículo2011 On variational formulations for elastic domain decomposition problems solved by SGBEM enforcing coupling conditions in a weak form Rivista di Matematica della Università di Parma
Artículo2011 Representativity of thermal stresses in designing composite joints based on singular stress states at multimaterial corners COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
Artículo2011 SGBEM for cohesive cracks in homogeneous media COMPUTATIONAL METHODS IN FRACTURE MECHANICS
Ponencia2011 Toughness determination in composite multimaterial closed corners ICCM International Conferences on Composite Materials
Artículo2011 Two variational formulations for elastic domain decomposition problems solved by SGBEM enforcing coupling conditions in a weak form ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2010 A BEM analysis of a penny-shaped interface crack using the open and the frictionless contact models: Range of validity of various asymptotic solutions ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2010 Analysis of a crack in a thin adhesive layer between orthotropic materials: An application to composite interlaminar fracture toughness test CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
Artículo2010 BEM analysis of crack onset and growth in composites using the linear elastic-brittle interface model RECENT DEVELOPMENTS IN BOUNDARY ELEMENT METHODS: A VOLUME TO HONOUR JOHN T. KATSIKADELIS
Artículo2010 Characterization and evolution of matrix and interface related damage in [0/90](s) laminates under tension. Part I: Numerical predictions COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2010 SGBEM with Lagrange multipliers applied to elastic domain decomposition problems with curved interfaces using non-matching meshes INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2009 BEM analysis of damage progress in 0/90 laminates ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2009 Computing stress singularities in transversely isotropic multimaterial corners by means of explicit expressions of the orthonormalized Stroh-eigenvectors ENGINEERING FRACTURE MECHANICS
Artículo2009 Critical study of existing solutions for a penny-shaped interface crack, comparing with a new boundary element solution allowing for frictionless contact ENGINEERING FRACTURE MECHANICS
Ponencia2009 Evaluation of the elastic Energy Release Rates of transverse and delamination cracks in [0/90] carbon-epoxy symmetric laminates ICCM International Conferences on Composite Materials
Artículo2009 Formulation and implementation of cohesive fracture models in the symmetric galerkin boundary element method. Study of mode i crack growth Anales de Mecánica de la Fractura
Artículo2009 Interface crack onset at a circular cylindrical inclusion under a remote transverse tension. Application of a coupled stress and energy criterion INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Ponencia2009 Interfacial fracture mechanics approach to the tension dominated inter-fibre failure under bi-directional loads ICCM International Conferences on Composite Materials
Artículo2009 Numerical analysis of debond propagation in the single fibre fragmentation test COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2009 Representativity of the singular stress state in the failure of adhesively bonded joints between metals and composites COMPOSITES SCIENCE AND TECHNOLOGY
Ponencia2009 Size effect in the critical remote stress causing debonding at the circular inclusion-matrix interface 12th International Conference on Fracture 2009, ICF-12
Artículo2008 A micromechanical view of inter-fibre failure of composite materials under compression transverse to the fibres COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2008 A parallel domain decomposition BEM algorithm for three-dimensional exponentially graded elasticity JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
Artículo2008 Discussion: "on the reference length and mode mixity for a bimaterial interface" Journal of Engineering Materials and Technology
Artículo2008 Green's function evaluation for three-dimensional exponentially graded elasticity INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2008 Modelado del crecimiento de una grieta en modo i a lo largo de una interfaz débil mediante el MEC. Aplicación al ensayo de fractura interlaminar de materiales compuestos Anales de Mecánica de la Fractura
Artículo2008 Numerical characterisation of the fibre-matrix interface crack growth in composites under transverse compression ENGINEERING FRACTURE MECHANICS
Artículo2008 On solvability of a boundary integral equation of the first kind for Dirichlet boundary value problems in plane elasticity COMPUTATIONAL MECHANICS
Editorial2008 On the reference length and mode mixity for a bimaterial interface Journal of Engineering Materials and Technology
Artículo2008 Singularity parameter determination in adhesively bonded lap joints for use in failure criteria COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2008 Stress state characterization of delamination cracks in [0/90] symmetric laminates by BEM INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2008 Two Variational Approaches for Domain Decomposition Problems Solved by SGBEM with Nonconforming Discretizations PHYSICS OF PARTICLES AND NUCLEI LETTERS
Artículo2008 Unique real-variable expressions of displacement and traction fundamental solutions covering all transversely isotropic elastic materials for 3D BEM INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2007 Boundary element analysis of three-dimensional exponentially graded isotropic elastic solids CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
Artículo2007 Comportamiento de las grietas de interfase en materiales compuestos fibrosos ante carga ciclica de tracción-tracción y traccion-compresion Anales de Mecánica de la Fractura
Artículo2007 Effects of the presence of compression in transverse cyclic loading on fibre-matrix debonding in unidirectional composite plies COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
Artículo2007 Estados singulares de tensión en esquinas multimateriales Anales de Mecánica de la Fractura
Artículo2007 Kinking of transversal interface cracks between fiber and matrix JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
Artículo2007 On the estimation of the first interpenetration point in the open model of interface cracks INTERNATIONAL JOURNAL OF FRACTURE
Capítulo2007 Problemas de contacto en el estudio del daño en materiales compuestos fibrosos Avances en mecánica de medios continuos : simposium en honor al profesor J.A. Garrido García
Artículo2007 Symmetric variational formulation of BIE for domain decomposition problems in elasticity - An SGBEM approach for nonconforming discretizations of curved interfaces CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
Artículo2006 A domain-independent integral for computation of stress intensity factors along three-dimensional crack fronts and edges by BEM INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2006 Application of BEM to generalized plane problems for anisotropic elastic materials in presence of contact ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2006 Direct evaluation of hypersingular galerkin surface integrals. II Electronic Journal of Boundary Elements
Artículo2006 Galerkin boundary integral analysis for the axisymmetric Laplace equation INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2006 Mecanica de la fractura de grietas de interfase, aplicación al estudio del fallo entre fibras a compresión de materiales compuestos Anales de Mecánica de la Fractura
Artículo2006 Note on the removal of rigid body motions in the solution of elastostatic traction boundary value problems by SGBEM ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2006 On the removal of the non-uniqueness in the solution of elastostatic problems by symmetric Galerkin BEM INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2005 Fundamental solutions for steady-state heat transfer in an exponentially graded anisotropic material ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK
Artículo2005 Weak formulation of axi-symmetric frictionless contact problems with boundary elements application to interface cracks COMPUTERS & STRUCTURES
Artículo2004 Aplicacion de la mecanica de la fractura al estudio del daño a nivel micromecanico en materiales compuestos Anales de Mecánica de la Fractura
Artículo2004 CARACTERIZACIÓN DEL DAÑO DE ACUERDO A LA MECÁNICA DE LA FRACTURA EN LAMINADOS 0/90 Anales de Mecánica de la Fractura
Artículo2004 On invertibility of boundary integral equation systems in linear elasticity Building Research Journal
Artículo2004 On invertibility of elastic single-layer potential operator Journal of Elasticity
Artículo2004 Relation between SIF and ERR based measures of fracture mode mixity in interface cracks INTERNATIONAL JOURNAL OF FRACTURE
Artículo2004 Treatment of singularities in Helmholtz-type equations using the boundary element method JOURNAL OF SOUND AND VIBRATION
Ponencia2003 A general procedure for a singularity analysis of anisotropic elastic multimaterial corners. Application to adhesive joints 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
Artículo2003 Evaluation of in-boundary stress in 2D BEM for isotropic elasticity. A comparative study COMPUTATIONAL MECHANICS
Ponencia2003 Micromechanical Bases for the Prediction of Failure of the Matrix in Fibrous Composites A Collection of technical papers - AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference
Artículo2003 Novel boundary integral equations for two-dimensional isotropic elasticity: An application to evaluation of the in-boundary stress JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
Ponencia2003 Single fiber fragmentation test. A bem analysis 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
Artículo2003 Singularities in 2D anisotropic potential problems in multi-material corners Real variable approach INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2003 Singularity analysis of anisotropic multimaterial corners INTERNATIONAL JOURNAL OF FRACTURE
Artículo2002 Comparing the conventional displacement BIE and the BIE formulations of the first and second kind in frictionless contact problems ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Ponencia2002 Comparing the conventional displacement, first-kind and second-kind BIEs in frictionless contact problems BOUNDARY ELEMENTS XXIV: INCORPORATING MESHLESS SOLUTIONS
Artículo2000 A critical study of hypersingular and strongly singular boundary integral representations of potential gradient COMPUTATIONAL MECHANICS
Artículo1999 A simple local smoothing scheme in strongly singular boundary integral representation of potential gradient COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo1999 Potential gradient recovery using a local smoothing procedure in the Cauchy integral Communications in Numerical Methods in Engineering
Ponencia1998 A comparison between non-conforming node-to-point and weak approaches in contact problems by BEM BOUNDARY ELEMENTS XX
Artículo1998 BEM solution of two-dimensional contact problems by weak application of contact conditions with nonconforming discretizations INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo1998 Integral kernels in the 2D Somigliana displacement and stress identities for anisotropic materials COMPUTATIONAL MECHANICS
Artículo1997 Stress singularities in 2D orthotropic coolers INTERNATIONAL JOURNAL OF FRACTURE
Artículo1997 Symmetrical representation of stresses in the Stroh formalism and its application to a dislocation and a dislocation dipole in an anisotropic elastic medium Journal of Elasticity
Artículo1997 Symmetry properties of the kernels of the hypersingular integral and the corresponding regularized integral in the 2D Somigliana stress identity for isotropic materials ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Capítulo1996 Aspectos numéricos del método de los elementos de contorno aplicado a materiales ortótropos Métodos numéricos en ingeniería : [comunicaciones presentadas al III Congreso de Métodos Numéricos en Ingeniería, celebrado en Zaragoza durante los días 3-6 de junio de 1996]
Artículo1996 On Stroh orthogonality relations: An alternative proof applicable to Lekhnitskii and Eshelby theories of an anisotropic body Journal of Elasticity
Artículo1996 On the removal of rigid body motions in the solution of elastostatic problems by direct BEM INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Capítulo1996 Un método simple de suavizar la representación integral singular fuerte de contorno del gradiente del potencial Métodos numéricos en ingeniería : [comunicaciones presentadas al III Congreso de Métodos Numéricos en Ingeniería, celebrado en Zaragoza durante los días 3-6 de junio de 1996]
Ponencia1995 Analysis of singularities in composite materials by BEM BOUNDARY ELEMENTS XVII
Artículo1995 Existence and evaluation of the two free terms in the hypersingular boundary integral equation of potential theory ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo1995 EXPLICIT FORMULAS OF THE INTEGRAL-KERNELS AND C-MATRIX IN THE 2D SOMIGLIANA IDENTITY FOR ORTHOTROPIC MATERIALS ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo1994 On computing boundary limiting values of boundary integrals with strongly singular and hypersingular kernels in 3D BEM for elastostatics ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Corrección1994 ON THE CAUCHY PRINCIPAL VALUE OF THE SURFACE INTEGRAL IN THE BOUNDARY INTEGRAL-EQUATION OF 3D ELASTICITY - (VOL 12, PG 289, 1993) ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo1993 A new formula for the C-matrix in the Somigliana identity Journal of Elasticity
Artículo1993 ON THE CAUCHY PRINCIPAL VALUE OF THE SURFACE INTEGRAL IN THE BOUNDARY INTEGRAL-EQUATION OF 3D ELASTICITY ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/01/2010 31/12/2013 Investigador/a Generación de un criterio de fallo para la predicción del fallo entre fibras en materiales compuestos en base a los mecanismos de daño del material (MAT2009-14022) Ministerio de Ciencia e Innovación (Nacional)
01/12/2003 30/11/2006 Investigador/a Caracterización de uniones adhesivas metal-metal, metal-composite y composite-composite (MAT2003-03315) Ministerio de Ciencia y Tecnología (Nacional)
01/01/2013 31/12/2015 Responsable Caracterización y Medida de las Propiedades de la Interfase en Materiales Compuestos Mediante Ensayos de Fibra Única Usando Enfoques no Clásicos de la Mecánica de la Fractura (MAT2012-37387) Ministerio de Economía y Competitividad (Nacional)
31/12/2005 31/12/2008 Investigador/a Caracterización de la resistencia ante cargas de pelado de uniones encoladas composite-composite. Definición de un ensayo para control de calidad de la unión (TRA2005-06764) Ministerio de Educación y Ciencia (Nacional)
01/01/2016 31/12/2018 Responsable Nuevos Enfoques de la Mecánica de la Fractura Computacional para la Caracterización de Inicio y Crecimiento de Grietas en Materiales Compuestos en Diferentes Escalas (MAT2015-71036-P) Ministerio de Economía y Competitividad (Nacional)
12/09/2001 30/05/2005 Investigador/a Proyecto FALCOM (SI-016//2001) Comisión Europea (Europeo)
01/01/2019 31/12/2021 Responsable Soluciones Elásticas Singulares para Esquinas y Grietas con Condiciones de Contorno Cohesivas o de Elasticidad de Superficie. Desarrollo de Elementos Finitos Especiales (PGC2018-099197-B-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional)
01/09/2005 01/09/2009 Investigador/a VERDI Virtual Engineering for Robust Manufacturing with Design Integration (SN-0184/2005) Comisión Europea (Europeo)
01/02/2020 31/01/2022 Responsable Nuevas soluciones elásticas asintóticas para grietas con condiciones de contorno cohesivas o de elasticidad de superficie y su aplicación en la implementación de nuevos elementos finitos y de contorno singulares (US-1266016) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
01/03/2006 28/02/2009 Investigador/a Predicción de fallo en materiales compuestos usados en la industria aeronáutica aplicando la mecánica de la fractura de grietas de interfase (EXC/2005/TEP-1207) Junta de Andalucía (Plan Andaluz de Investigación) (Autonómico)
01/01/2020 31/12/2022 Responsable Predicción de daño en uniones adhesivas con materiales compuestos usando la Mecánica de la Fractura Finita. Desarrollo y aplicación de nuevos elementos finitos singulares (DAMCOMP) (P18-FR-1928) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
13/01/2009 31/12/2013 Responsable Estudio de Inicio y Propagación de Daño en Materiales Compuestos a Escala Micro y Meso Mediante Desarrollo y Aplicación de la Mecánica de la Fractura Finita (P08-TEP-04051) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)
28/12/2000 27/12/2003 Investigador/a Desarrollo de criterios de fallo de materiales compuestos fibrosos basados en mecanismos de fallo. Estudio micromecánico (MAT2000-1115) Ministerio de Ciencia y Tecnología (Nacional)
01/05/2020 30/04/2024 Responsable New strategies for multifield fracture problems across scales in heterogeneous systems for Energy, Health and Transport -NEWFRAC (H2020-861061) Comisión Europea (Europeo)

Ayudas

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
09/04/2011 08/05/2011 Responsable Estancia en el Institute Jean Le Rond d'Alembert - Pierre and Marie Curie University, París (Francia) (PP2011-05-149) Universidad de Sevilla (Local)