Ver Investigador - - Prisma - Unidad de Bibliometría

José Ángel González Pérez

Tipo Año Título Fuente
Artículo2024 Higher-order inverse mass matrices for the explicit transient analysis of heterogeneous solids INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Ponencia2023 Asynchronously in time integrated interface dynamics problem while maintaining zero interface energy COMPDYN Proceedings
Artículo2023 Displacement-based partitioned equations of motion for structures: Formulation and proof-of-concept applications INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2023 Energy-conserving interface dynamics with asynchronous direct time integration employing arbitrary time steps COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2023 Three-field partitioned analysis of fluid–structure interaction problems with a consistent interface model COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Ponencia2022 Test methods for dynamic characterization of polymer‐based composite materials ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
Artículo2021 Bi-penalty stabilized technique with predictor–corrector time scheme for contact-impact problems of elastic bars MATHEMATICS AND COMPUTERS IN SIMULATION
Artículo2021 Partitioned formulation of contact-impact problems with stabilized contact constraints and reciprocal mass matrices INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2020 Accelerating the convergence of AFETI partitioned analysis of heterogeneous structural dynamical systems COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2020 Control del aislamiento acústico al ruido aéreo entre particiones interiores en obra terminada según la normativa CTE-DB-HR DYNA
Artículo2020 Coupled fluid-solid thermal interaction modeling for efficient transient simulation of biphasic water-steam energy systems APPLIED MATHEMATICAL MODELLING
Artículo2020 Large-step explicit time integration via mass matrix tailoring INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2019 Explicit multistep time integration for discontinuous elastic stress wave propagation in heterogeneous solids INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2019 Inverse mass matrix for isogeometric explicit transient analysis via the method of localized Lagrange multipliers INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Ponencia2019 Partitioned formulation of contact-impact problems with stabilized contact constraints and reciprocal mass matrices COMPDYN Proceedings
Ponencia2019 Time step estimates for reciprocal mass matrices using Ostrowski's bounds COMPDYN Proceedings
Artículo2018 Inverse mass matrix via the method of localized lagrange multipliers INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2018 Treatment of Non-matching Interfaces in Partitioned Fluid-Structure Interaction Problems Computational and Experimental Methods in Structures
Artículo2018 Watermills: The Origin of the Use of Renewable Hydraulic Energy in Spain INDUSTRIAL ARCHAEOLOGY REVIEW
Artículo2017 A coupled finite and boundary spectral element method for linear water-wave propagation problems APPLIED MATHEMATICAL MODELLING
Ponencia2017 An explicit time scheme with local time stepping for one-dimensional wave and impact problems in layered and functionally graded materials COMPDYN 2017 - Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
Ponencia2017 Inverse mass matrix via the method of localized Lagrange multipliers COMPDYN 2017 - Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
Artículo2017 Stabilized mixed displacement-pressure finite element formulation for linear hydrodynamic problems with free surfaces COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2016 Boundary element formulation of the Mild-Slope equation for harmonic water waves propagating over unidirectional variable bathymetries ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2016 Structural topology optimization of the transition piece for an offshore wind turbine with jacket foundation RENEWABLE ENERGY
Artículo2015 Partitioned solution strategies for coupled BEM-FEM acoustic fluid-structure interaction problems COMPUTERS & STRUCTURES
Artículo2014 A partitioned formulation for FEM/BEM coupling in contact problems using localized Lagrange multipliers WEAR AND CONTACT MECHANICS
Artículo2014 Partitioned analysis of flexible multibody systems using filtered linear finite element deformational modes INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Ponencia2013 Coupled analysis of nonlinear structural motion and fluid sloshing Computational Methods for Coupled Problems in Science and Engineering V - A Conference Celebrating the 60th Birthday of Eugenio Onate, COUPLED PROBLEMS 2013
Ponencia2013 Non-symmetrical BE-FE partitioned formulation for acoustic fluid-structure interaction problems Computational Methods for Coupled Problems in Science and Engineering V - A Conference Celebrating the 60th Birthday of Eugenio Onate, COUPLED PROBLEMS 2013
Artículo2013 The nsBETI method: an extension of the FETI method to non-symmetrical BEM-FEM coupled problems INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Artículo2012 A simple explicit-implicit finite element tearing and interconnecting transient analysis algorithm INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Ponencia2012 Non-symmetric BEM-FEM tearing and interconnecting method ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers
Artículo2012 Partitioned vibration analysis of internal fluid-structure interaction problems INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Revisión2010 Partitioned formulation of internal and gravity waves interacting with flexible structures COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Artículo2009 Numerical analysis of the pressure field on curved and open self-weighted metallic roofs due to the wind effect by the finite volume method APPLIED MATHEMATICS AND COMPUTATION
Artículo2008 A formulation based on localized Lagrange multipliers for BEM-FEM coupling in contact problems COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
Capítulo2008 A formulation based on the localized lagrange multipliers for solving 3D frictional contact problems using the bem Numerical Modeling of Coupled Phenomena in Science and Engineering: Practical Use and Examples
Artículo2007 FEM and BEM coupling in elastostatics using localized Lagrange multipliers INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Ponencia2007 Partitioned formulation for solving 3D frictional contact problems with BEM using localized lagrange multipliers International Conference on Computational & Experimental Engineering and Sciences. Proceedings
Artículo2006 Efficient stress evaluation of stationary viscoelastic rolling contact problems using the boundary element method: Application to viscoelastic coatings ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Artículo2006 Partitioned formulation of frictional contact problems using localized Lagrange multipliers Communications in Numerical Methods in Engineering
Ponencia2004 Detección remota de defectos ocultos bajo recubrimientos viscoelásticos Anales de Ingeniería Mecánica
Artículo2004 Linear viscoelastic boundary element formulation for steady state moving loads ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
Ponencia2004 Simulacion numérica en paralelo de flujos con capa límite desprendida: aplicaciones en aerodinámica civil Anales de Ingeniería Mecánica
Ponencia2002 Formulación del método de los elementos de contorno para cargas móviles en medios viscoelásticos Métodos numéricos en ingeniería V
Artículo2002 Solving 2D transient rolling contact problems using the BEM and mathematical programming techniques INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Ponencia2000 An algorithm to solve 2D transient rolling contact problems European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000
Artículo2000 An algorithm to solve coupled 2D rolling contact problems INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Ponencia2000 Solución del problema transitorio bidimensional de contacto con rodadura usando el método de los elementos de contorno Anales de Ingeniería Mecánica
Artículo2000 Solving 2D rolling problems using the NORM-TANG iteration and mathematical programming COMPUTERS & STRUCTURES
Artículo2000 Solving rolling contact problems using Boundary Element Method and mathematical programming algorithms CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
Ponencia1999 Problemas de contacto con rodadura usando el método de los elementos de contorno Métodos numéricos en ingeniería : Comunicaciones presentadas al IV Congreso de Métodos Numéricos en Ingeniería, celebrado en Sevilla, durante los días 7-10 de Junio de 1999
Artículo1998 Using the boundary element method to solve rolling contact problems ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/09/2023 31/08/2027 Investigador/a Sistemas de Nanocompuestos Activos Sin Plomo: Un Enfoque Computacional hacia Dispositivos Hápticos Sostenibles (PID2022-137903OB-I00) Ministerio de Ciencia e Innovación (Nacional)
01/01/2020 31/12/2022 Investigador/a Geometría, jerarquía y (meta)elasticidad para la integridad y eficiencia de materiales piezocompuestos y piezocelulares (P18-RT-3128) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
01/01/2011 31/12/2014 Responsable Integración de Subestructuras Mediante Acoplamientos Complejos y Formulación Particionada (DPI2010-19331) Ministerio de Ciencia e Innovación (Nacional)
13/01/2009 13/01/2012 Responsable Formulaciones Particionadas para Problemas Dinámicos y de Contacto (P08-TEP-03804) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)
01/10/2006 30/06/2010 Investigador/a Análisis de elementos mecánicos mediante subestructuras (DPI2006-04598) Ministerio de Educación y Ciencia (Nacional)
01/03/2006 28/02/2009 Investigador/a Subestructuracion y acoplamientos en mecánica de sólidos (EXC/2005/TEP-882) Junta de Andalucía (Plan Andaluz de Investigación) (Autonómico)
01/07/2004 31/12/2007 Investigador/a Simulación del comportamiento del corazón y periferia vascular en condiciones sanas y patológicas. Aplicación al diseño y evaluación de dispositivos intravasculares y válvulas cardíacas (DPI2004-07410-C03-03) Ministerio de Ciencia y Tecnología (Nacional)
15/11/2003 15/11/2006 Investigador/a Contacto y rodadura en problemas 3D usando el método de los elementos de contorno (DPI2003-00487) Ministerio de Ciencia y Tecnología (Nacional)
28/12/2000 27/12/2003 Investigador/a Integridad estructural de elementos mecánicos (DPI2000-1642) Ministerio de Ciencia y Tecnología (Nacional)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/04/2014 31/12/2014 Responsable Large Scales Thermal Energy Storage (PI-1279/2014) NEST AS (Desconocido)
01/03/2008 01/05/2008 Investigador/a Asesoramiento técnico sobre el accidente ocurrido el 29/11/2005, en lo que se refiere a la rotura de la pluma de una grúa móvil autopropulsada. Juzgado nº 18 de Sevilla. Diligencias previas 7925/05 (PI-0080/2008) Geotecnia y Cimientos, S.A. (Desconocido)
01/06/2007 31/12/2010 Investigador/a SGI-PFV: Diseño y Fabricación de Vehículos Especiales (PI-0523/2007) Grupo Albatros (Desconocido)
01/01/2006 31/12/2006 Investigador/a Análisis de Refuerzos de Silos Metálicos (AE-0027/2006) Cementos Barrero, S.A. (Desconocido)
01/10/2005 31/12/2005 Investigador/a Documentación de proyectos de I+D+I (ES-0362/2005) Desarrollo de Tecnologías Aplicadas (Desconocido)
01/10/2005 31/12/2005 Investigador/a Documentación de proyectos de I+D+I (ES-0363/2005) Disseny Tècnic, DITECSA S.A. (Desconocido)
01/01/2005 31/12/2005 Investigador/a Organización del departamento de estudios y propuestas (ES-0010/05) VisaSur S.A. (Desconocido)
01/01/2005 31/12/2005 Investigador/a Informe pericial (ES-0013/2005) Cementos Barrero, S.A. (Desconocido)
01/01/2005 31/12/2005 Investigador/a Análisis de silos metálicos (ES-0019/2005) Cementos Barrero, S.A. (Desconocido)

Ayudas

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/05/2008 30/06/2009 Investigador/a Beteq International Conference on boundary Element Techniques (DPI2008-01596-E) Ministerio de Educación y Ciencia (Nacional)
El investigador no tiene ningún resultado de investigación asociado